Fault-Tolerant Tripod Gaits for Hexapod Robots

육각 보행 로봇의 내고장성 세다리 걸음새

  • 양정민 (대구가톨릭대 전자공학과) ;
  • 노지명 (대구가톨릭대 전자공학과)
  • Published : 2003.12.01

Abstract

Fault-tolerance is an important design criterion for robotic systems operating in hazardous or remote environments. This paper addresses the issue of tolerating a locked joint failure in gait planning for hexapod walking machines which have symmetric structures and legs in the form of an articulated arm with three revolute joints. A locked joint failure is one for which a joint cannot move and is locked in place. If a failed joint is locked, the workspace of the resulting leg is constrained, but hexapod walking machines have the ability to continue static walking. A strategy of fault-tolerant tripod gait is proposed and, as a specific form, a periodic tripod gait is presented in which hexapod walking machines have the maximum stride length after a locked failure. The adjustment procedure from a normal gait to the proposed fault-tolerant gait is shown to demonstrate the applicability of the proposed scheme.

Keywords

References

  1. G. A. Pratt, 'Legged robots at MIT: what's new since raibert,' IEEE Robotics and Automation Magazine, vol. 7, no. 3, pp. 15-19, 2000 https://doi.org/10.1109/100.876907
  2. S. L. Laubach and J. W. Burdick, 'An autonomous sensor-based path-planner for planetary microrovers,' in Proceedings of IEEE International Conference on Robotics and Automation, pp. 347-354, 1999 https://doi.org/10.1109/ROBOT.1999.770003
  3. M. L. Visinsky, J. R. Cavallaro, and I. D. Walker, 'A dynamic fault tolerance framework for remote robots,' IEEE Transactions on Robotics and Automation, vol. 11, no. 4, pp. 477-490, 1995 https://doi.org/10.1109/70.406930
  4. C. L. Lewis and A. A. Maciejewski, 'Fault tolerant operation of kinematically redundant manipulators for locked joint failures,' IEEE Transactions on Robotics and Automation, vol. 13, no. 4, pp. 622-629, 1997 https://doi.org/10.1109/70.611335
  5. J. G. Keramas, 이만형 외 역, 로봇공학 (Robot Technology Fundamentals), 사이텍미디어, 서울, 2000
  6. L. E. Parker, 'L-ALLIANCE: Task-oriented multirobot learning in behavior-based systems,' Advanced Robotics, vol. 11, no. 4, pp. 305-322, 1997 https://doi.org/10.1163/156855397X00344
  7. K. N. Groom, A. A. Maciejewski and V. Balakrishnan, 'Real-time failure-tolerant control of kinematically redundant manipulators,' IEEE Transactions on Robotics and Automation, vol. 15, no. 6, pp. 1109-1116, 1999 https://doi.org/10.1109/70.817673
  8. S. M. Song, K. J. Waldron, Machines That Walk: The Adaptive Suspension Vehicle, MIT Press, Cambridge, MA, 1989
  9. 이수영, 홍예선, '4족 보행 로봇의 걸음새 안정화를 위한 몸체 임피던스 제어', 대한전기학회논문지, 제49D권, 제5호, pp. 257-263, 5월, 2000
  10. P. K. Pal, K. Jayarajan, 'Generation of free gait-a graph search approach,' IEEE Transactions on Robotics and Automation, vol. 7, no. 3, pp. 299-305, 1991 https://doi.org/10.1109/70.88139
  11. T. T. Lee, C. M. Liao, T. K. Chen, 'On the stability properties of hexapod tripod gait,' IEEE Transactions on Robotics and Automation, vol. 4, no. 4, pp. 427-434, 1988 https://doi.org/10.1109/56.808
  12. P. G. de Santos and M. A. Jimenez, 'Generation of discontinuous gait for quadruped walking vehicles,' Journal of Robotic System, vol. 12, no. 9, pp. 599-611, 1995 https://doi.org/10.1002/rob.4620120903
  13. J. D. English and A. A. Maciejewski, 'Fault tolerance for kinematically redundant manipulators: anticipating free-swinging joint failures,' IEEE Transactions on Robotics and Automation, vol. 14, no. 4, pp. 566-575, 1998 https://doi.org/10.1109/70.704223
  14. J.-M. Yang and J.-H. Kim, 'A fault tolerant gait for a hexapod robot over uneven terrain,' IEEE Transactions on Systems, Man, and Cybernetics-Part:B, vol. 30, no. 1, pp. 172-180, 2000 https://doi.org/10.1109/3477.826957