DOI QR코드

DOI QR Code

Optimal Design and fabrication of Prototype DC Reactor for Inductive Superconducting fault Current Limiter

유도형 고온초전도 한류기용 Prototype 직류 리액터의 설계와 제작

  • 김태중 (성남기능대학 전기공학과) ;
  • 강형구 (연세대학교 전기전자공학과) ;
  • 고태국 (연세대학교 전기전자공학과)
  • Published : 2003.12.01

Abstract

In this paper, dc reactor lot the inductive high-Tc superconducting fault current limiter (SFCL) was optimally designed by finite element method(FEM). The Prototype high-Tc do reactor was manufactured and compared to the results of design. This dc reactor consists of 4∼stacked double pancake coils which are wounded with Bi-2223 wire coated with SUS315L. Kapton tape is used for the insulation of turn to turn and layer to layer. Each pancake is connected in series by soldering Finally, optimal design and manufacture method lot the dc reactor is suggested in this paper. Through the comparison of result of optimal design and experimental result of prototype high-Tc superconducting dc reactor, reliance on the design of the high-Tc dc reactor tot the 1.2 kV/80 A SFCL is proved.

Keywords

References

  1. Proceedings of KIASC Conference 2002 Newton Method를 이용한 DC Reactor Type 한류기의 최적설계 서호준;이승제
  2. Proceedings of KIASC Conference 2002 유한요소법을 이용한 유도형 고온 초전도 한류기용 DC Reactor의 설계 파라미터 결정법에 관한 연구 김용구;강형구
  3. Presented at MT-15 High-field performance of BSCCO coils with an outer diameter of 130mm T.Kiyoshi;H.Kitaguchi;H.Mumakura
  4. IEEE Transactions on Applied Supercon- ductivity v.11 no.1 Design and test results of 6.6 kV high-Tc superconducting fault current limiter Takashi Yazawa;Eriko Yoneda
  5. IEEE Transactions on Applied Superconductivity v.9 no.2 Performance of DC reactor type fault current limiter using high temperature superconducting coil M.Yamaguchi;S.Fukui
  6. 전기전자재료학회논문지 v.13 no.3 Bi-2223 초전도선재의 상전도 및 초전도-접합부 특성평가 김정호;지봉기;박형상;임준형;오승진;주진호;황보훈;나완수
  7. 전기전자재료학회논문지 v.8 no.4 설계조건에 따른 고온 초전도 마그넷의 특성변화 김민기;고요;한병성