Journal of the Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회논문지)

The Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회)
권호 표지
DOI QR코드

DOI QR Code

Property Improvement of YBCO Thick films by EPD with Addition of PEG

PEG 첨가에 의한 YBCO 전착후막의 특성 향상

  • Published : 2003.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

The electrophoretic deposition method using the suspension solution with additives under the electric potential was applied for the fabrication of YBCO superconductor wire. This method was able to simplify the fabrication facilities, and produce an uniform and dense thick film. To improve the critical current density of deposited films, the additive PEGs(Poly Ethylene Glycole) with the molecular weight of 600, 1000 and 3400 were used as chemical binders for the suspension solution. The organic additive (PEG) showed better effects to the properties of YBCO superconductor wire. The PEG improved the adhesion between superconductor particles and suppressed the crack on the surface, which enhanced the surface uniformity and density of YBCO deposited film. It was found that acetone suspension solution showed better deposition properties than the others. The samples fabricated in the solution with the additive, 8 vol.% of 1% PEG(1000), showed the highest critical current density measured as 2300∼2400 A/$\textrm{cm}^2$ at 77 K, 0 T.

Keywords

References

  1. Phy. Rev. Lett. v.58 no.9 Superconductivity at 93 K in a new mixed-phase Y-Ba-Cu-O compound system at ambient pressure M.K.Wu;J.R.Ashburn;C.J.Torng;P.H.Hor;R.L.Meng;L.Gao;Z.J.Huang;Y.Q.Wang;C.W.Chu https://doi.org/10.1103/PhysRevLett.58.908
  2. Jpn. J. Appl. Phys. v.30 no.9B (Pb.La)(Zr,Ti)O₃films by multiple electrophoretic deposition/sintering processing Shinichi Sugiyama;Akira Takagi;Kaoru Tsuzuki https://doi.org/10.1143/JJAP.30.2170
  3. Physica C v.337 no.1-4 Preparation of YBCO superconducting thick film by electrophoresis Soh,D.;Shan,Y.;Park,J.;Li,Y.;Cho,Y. https://doi.org/10.1016/S0921-4534(00)00053-8
  4. Jpn. J. Appl. Phys v.35 Preparation of TB(S)CCO superconductor coating by electrophoretic deposition method Hideyuki Negishi https://doi.org/10.1143/JJAP.35.4302
  5. 전기전자재료학회논문지 v.12 no.10 Preparation of YBCO superconducting wire by electrophoretic thick film deposition 소대화;박정철;이영매;추순남
  6. 전기전자재료학회논문지 v.15 no.3 Peculiarities of SHS and solid state synthesis of $ReBa_2Cu_3O_7 _X$ materials Soh Dcawha;Korobova Natalya https://doi.org/10.4313/JKEM.2002.15.3.275
  7. Trans. on EEM v.3 no.2 Zone-melting process of NdBaCuO under low oxygen pressure Soh Deawha;Fan Zhanguo;Gao Weiying
  8. Trans. on EEM v.3 no.3 $Nd_{1+x}Ba_{2\;x}Cu_3O_{7\;8}$ bulk superconductor by zone-melt process Dea-Wha Soh;Fan Zhan-Guo