A Subchannel Analysis Code for LMR Core Subassembly Thermal Hydraulic Analysis: The MATRA-LMR

  • Lim, Hyun-Jin (Ajou University, Korea Atomic Energy Research Institute) ;
  • Kim, Young-Gyun (Ajou University, Korea Atomic Energy Research Institute) ;
  • Kim, Yeong-Il (Ajou University, Korea Atomic Energy Research Institute) ;
  • Oh, Se-Kee (Ajou University, Korea Atomic Energy Research Institute)
  • Published : 2003.11.01

Abstract

The MATRA-LMR code has been developed based on a subchannel analysis method for LMR (Liquid Metal Reactor) core subassembly thermal hydraulic design and analysis. The code was improved to allow a seven assembly calculation and can account for inter-assembly heat transfer based on a lumped parameter model. This paper describes the main modifications and improvements of the code and shows reference calculation results which compared single assembly calculation with seven assembly calculation cased for driver and blanket subassemblies of the KALIMER 150 MWe breakeven conceptual design core. KAL- IMER is a pool-type sodium cooled reactor with a thermal output of 392.0 MWth, which have inherently safe, environmentally friendly, proliferation-resistant and economically viable reactor concepts.

Keywords

References

  1. Cheng, S,K, and Todreas, N.E., 'Hydrodynamic Models and Correlations for Bare and Wire-wrapped Hexagonal Rod Bundles - Bundle Friction Factors, Subchannel Friction Factors and Mixing Parameters', Nuclear Engineering and Design, 92, 227 (1986) https://doi.org/10.1016/0029-5493(86)90249-9
  2. Chiu, D., et al.: 'Turbulent Flow Split Model and Supporting Experiments for Wire-wrap Core Assemblies', COO-2245-56TR, MIT. (1978)
  3. George, TL, et al.: 'COBRA-WC: A Version of COBRA for Single-Phase Multi subassembly Thermal Hydraulic Transient Analysis', PNL-3259, PNL. (1980)
  4. Kim, W.S., et al.: 'A Subchannel Analysis Code MATRA-LMR for Wire-Wrapped Liquid Metal Cooled Reactor Subassembly', Annals of Nuclear Energy, 29(2) (2002)
  5. Lim, H.L., et al.: 'Analysis on Temperature Profiles of KALIMER Breakeven Core Subassemblies', Proc. of KNS Spring Meeting, Gwangjou, Korea, May 24-25 (2002)
  6. MacDougall, J.D. and Lillington, J.N.: 'The Sabre Code for Fuel Rod Cluster Thermohydraulics', Nuclear Engineering and Design, 82, 171 (1984) https://doi.org/10.1016/0029-5493(84)90210-3
  7. Novendstern, E.: 'Turbulent Flow Pressure Drop Model for Fuel Rod Assemblies Utilizing A Helical Wire-wrap Spacer System', Nucl. Eng. and Des., 22, 19 (1972) https://doi.org/10.1016/0029-5493(72)90058-1
  8. Park, C.K.: 'Development of Korea Advanced Liquid Metal Reactor', IWGFR (1998)
  9. Tang, Y.S., et aI., 'Thermal Analysis of LiquidMetal Fast Breeder Reactors', ANS (1978)
  10. Wheeler, CL, et al.: 'COBRA-IV-I : An Interim Version of COBRA for Thermal Hydraulic Analysis of Rod Bundle Nuclear Fuel Elements and Cores', BNWL-1662 (1976)
  11. Yang, W.S.: 'An LMR Core Thermal-Hydraulics Code Based on the ENERGY Model', Journal of Korean Nuclear Society, 29(5), 406 (1997)
  12. Yoo, Y.I. and Hwang, D.H., 'Development of Subchannel Analysis Code MATRA a-Version', Proc. of KNS Autumn Meeting, Taegu, Korea, October 2425 (1997)