Journal of Institute of Control, Robotics and Systems (제어로봇시스템학회논문지)

Institute of Control, Robotics and Systems (제어로봇시스템학회)
권호 표지
DOI QR코드

DOI QR Code

Relative Motion Control Methodology Using the Minimum Relative Error Between Two Systems

두 시스템간의 편차 최소화를 적용한 상대적 동작제어 방법

  • 김성권 (한국산업기술대학교 제어계측공학과)
  • Published : 2003.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

A new relative motion control methodology for a following system to an independent leading system is proposed for controlling relative position, velocity, and tension etc. It is based on maintaining minimum relative error between two independent systems. The control command of the following system to a leading system is generated by adding the current command and the output of the relative error compensation. The proposed control method is implemented on the experimental equipment which is a wire winding-unwinding system to control the tension of the line. The results show the unwinding system(follower) following the independent motion of the winding system(leader) to control the constant tension of the line in order to keep the roller dancer in reference position. The relative motion control method proposed in this paper can be applied to high precision equipment for unwinding and winding fine wire, fine fiber, and tape etc.

Keywords

References

  1. D. Necsulescu, 'Mechatronics', Prentice Hall, 2002
  2. Bishop, 'Mechatronics handbook', CRC press, 2002
  3. K. Okada, 'System dynamics', Prentice-Hall, 1998
  4. Infranor, 'Operation manual series SMTBDI', 1998
  5. S. H. Jeon, J.-M. Kim, K.-C. Jung, S. K. Sul, and J.-Y. Choi, ' Decoupling control of bridle rolls for speed mill drive system', IEEE Transactions on Industry Applications. vol. 35, no. 1, Jan./Feb. 1999 https://doi.org/10.1109/28.740855
  6. N. A. Ebler, R. Arnason, G. Michaelis, and N. D'Sa, 'Tension control: dancer rolls or load cells,' IEEE Trans. Ind. Applicat., vol. 29, pp. 727-739, July/Aug. 1993 https://doi.org/10.1109/28.231986
  7. D. Jouve and D. Bui, 'Digital servo drives for material tension control and winding/unwinding applications,' in Proc. PCIM Conf., pp. 71-78, 1996
  8. W. Wolfermann, 'Tension control of webs - a review of the problems and solutions in the present and future', Proceedings of the Third International Conference on Web Handling, Stillwater, Oklahoma, pp 198-228, 1995
  9. P. Lin and M. S. Lan, 'Effects of PID gains for controller with dancer mechanism on web tension', Proceedings of the Second International Conference on Web Handling, Stillwater, Oklahoma, pp. 66-76, 1993
  10. B. T. Boulter and Zhiqiang Gao, 'A novel approach for on-line self-tuning web tension regulation', IEEE Conference on Control Applications - Proceedings, pp. 91-98, 1995 https://doi.org/10.1109/CCA.1995.555647
  11. N. S. Nise, 'Control systems engineering' 2nd edition, Addison-Wesley Publishing co., 1995
  12. K. Okada, 'Modern control engineering', Prentice-Hall, 1990
  13. 권욱현, 권오규, 홍금식, 이준화 '제어시스템 공학', 청문각, 1999