위험 선별 및 분석 통합 자동화 시스템 개발에 대한 연구

Study on Development of Automated System for Hazard Screening at Analysis

  • 한의진 (서울대학교 응용화학부) ;
  • 김용하 (서울대학교 응용화학부) ;
  • 최승준 (서울대학교 응용화학부) ;
  • 김구회 (서울대학교 화학공정신기술 연구소) ;
  • 윤인섭 (서울대학교 응용화학부)
  • 발행 : 2003.12.01

초록

화학공장은 위험한 물리 화학적 특성을 가진 많은 물질들을 다루기 때문에 다른 어떤 공장보다 더 사고의 위험성이 크다. 띠라서 화학공장에서의 각 장치에 대한 위험성 평가는 반드시 필요하다. 현재 사용되고 있는 위험성 평가 방법은 정성적 또는 정량적인 방법으로 각각 개별적으로 적용되는데 정성적, 정량적의 통합된 방법을 적용하면 빠르고 쉽게 적용할 수 있다는 정성적인 방법의 장점과 정밀하게 평가될 수 있다는 정량적인 방법의 장점을 모두 갖출 수 있다. 이러한 통합된 위험성 평가방법을 적용하고 자동화한 ASCA(Automated System for Hazard Screening & Analysis)라는 S/W를 개발하여 실제 공정에 적용하였다. 본 연구에서는 방향족 긍정 중 H.T.U(Hydrotreating Unit)에 대하여 ASCA를 적용하여 각 장치의 상대 순위를 알아보고 D-101이라는 저장탱크에서 단열 실패로 온도 상승이 일어난 경우의 장치고장으로 인한 변수 이상과 발생 가능한 사고의 영향을 알아보았다. 이러한 통합 위험성 평가 시스템을 화학공장에 적용하여 봄으로써 사고 시나리오를 세워서 사고에 대한 비상사태를 대처할 수 있는 능력을 키울 수 있으며 사고를 예방할 수 있을 것이다.

Hazard Analysis is one of the basic tasks to ensure the safety of chemical plants. However, it is an arduous, tedious, time-consuming work and requires multidisciplinary knowledge and demands considerable cognitive load from the analysts. To overcome these problems, there have been attempts to automate this work by utilizing computer technology, particularly in the area of knowledge-based technique. There is two methods in the risk assessment of Chemical plant; quantitative and qualitative risk assessment. Both of them have been applied respectively, but if the integrated method of quantitative and qualitative risk assessments is used, all of the advantage of two methods can be applied. It is difficult to carry out integrated risk management of chemical plant. Therefore, automated integration system of risk management is necessary. We developed S/W Automated System for Hazard Screening & Analysis(ASCA) and applied to practical plant. By applying ASCA to case study, we can get the information about relative ranks of equipments, variable deviation, and consequence of potential accident. In this study, we applied ASCA to the H.T.U(Hydrotreating Unit) of the process to produce aromatic material. We could know relative ranks of equipments, variable deviation of malfunction in storage tank, D-101, and consequence of potential accident using ASCA. If integrated risk management in the chemical plant is applied, we can develop the emergency plan and prevent the accident.

키워드

참고문헌

  1. 김구회, '화학공정의 가상사고 시나리오 합성에 기반한 위험성 평가 시스템', 박사학위논문, 서울대학교 응용화학부(2000)
  2. 서정철, '화학공정의 안전성 분석을 위한 다중 모델 접근 방법', 박사학위논문, 서울대학교 화학공학과(1997)
  3. 강병관, '다중모델 접근법에 기반한 회분식 공정의 위험성 분석 자동화에 관한 연구', 박사학위논문, 서울대학교 응용화학부(2001)
  4. 강경욱, '다중모델 접근방법을 이용한 화학공정 안전성 자동분석기 개발에 관한 연구', 석사학위논문, 서울대학교 화학공학과(1998)
  5. 김구회, 이동언, 김용하, 안성준, 윤인섭, '화학공정 위험 영향 평가기술에서의 다중요소분석기법을 이용한 사고 시나리오 산정에 관한 전략', 한국화재 . 소방학회논문지, Vol. 15, Nol. 4(2001)
  6. 김구회, 안성준, 윤인섭, '화학공정의 피해예측시스템 개발에 관한 연구', 한국화재 . 소방학회 추계학술대회 논문집, pp.333-337(2002)
  7. Iri, M., K. Aoki, E. O'shima, and H. Matsuyama, 'An Algorithm for Diagnosis of System Failures in the Chemical Process', Comput. Chem. Eng., Vol. 3, pp.489-493(1979) https://doi.org/10.1016/0098-1354(79)80079-4
  8. Kramer, M. A. and B. L. Palowitch, Jr, 'A Rule-Based Approach to Fault Diagnosis Using the Signed Directed Graph', AIChE J., Vol. 33, p1067(1987b) https://doi.org/10.1002/aic.690330703
  9. NFPA, 'NFPA Code 325M Fire Hazard Properties of Flammable Liquids, Gases, and Volatile Solids', National Fire Protection Association(1991a)
  10. NFPA, 'NFPA Code 49 Hazardous Chemical Data, National Fire Protection Association'(1991b)
  11. Zerkani, H. and A. G. Rushton, 'Computer Emulation of Hazard Identification', Proceedings of IFAC Workshop, pp.221(1992)
  12. CCPS, 'Guidelines for Process Equipment Reliability Data', AICHE(1989)
  13. CCPS, 'Guidelines for Hazard Evaluation Procedure', AICHE(1985)
  14. Hunt A., B. E. Kelly, J. S. Mullhi, F. P. Lees, and A. G. Rushton, 'The Propagation of Faults in Process Plants', Reliability Engineering and System Safety, Vol. 39, No. 2, pp.173-194(1993) https://doi.org/10.1016/0951-8320(93)90041-V