Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Contouring Error of a Machine Tool at Inflection Points

변곡점에서 공작기계의 윤곽오차

  • 안일혁 (고려대학교 대학원 기계공학과) ;
  • 김성수 (고려대학교 대학원 기계공학과) ;
  • 민경석 (고려대학교 대학원 기계공학과) ;
  • 최우천 (고려대학교 기계공학과) ;
  • 홍대희 (고려대학교 기계공학과)
  • Published : 2003.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

Contouring errors are important especially for high speed and precision machining. In this study, contouring errors along contours having inflection points are studied. When a table of a machine tool moves along a circular path, acceleration acts toward the center of the circle. Thus, at inflection points, acceleration as well as inertia force changes its direction abruptly. The effect of inertia force on the contouring error is investigated in this study. It is found that the contouring error at an inflection point is proportional to the acceleration. This result can be useful in determining contouring errors along general paths.

Keywords

References

  1. Knapp, W., 'Test of the Three-Dimensional Uncertainty of Machine Tools and Measuring Machines and its Relation to the Machine Errors,' Annals CIRP, 32(1), pp. 459-464, 1983 https://doi.org/10.1016/S0007-8506(07)63440-4
  2. Kakino, Y., Ihara, Y. and Nakatsu, Y., 'The Measurement of Motion Error of NC Machine Tools and Diagnosis of their Origin by using Telescoping Magnetic Ball Bar Method,' Annals CIRP, 36, pp. 377-380, 1987 https://doi.org/10.1016/S0007-8506(07)62626-2
  3. Knapp, W., 'Accuracy of Length Measurement and Positioning: Statistical Measurement and Contouring Mode,' Annals CIRP, 37(1), pp. 511-514, 1988 https://doi.org/10.1016/S0007-8506(07)61689-8
  4. Kwon, H. D. and Burdekin, M., 'Measurement and Diagnostics of Machine Tool Errors during Circular Contouring Motions,' Proc. Instn Mech Engrs, Vol 212, Part B, pp. 343-356, 1998 https://doi.org/10.1243/0954405981515950
  5. Lee, Y. and Jee, S., 'Adaptive Cross-Coupling Control for High-Speed Nonlinear Contour Machining,' Journal of the KSPE, Vol. 17, No. 11, pp. 108-114, 1999
  6. Na, I.-J., Choi, C.-H., Jang, T.-J., Choi, B.-K. and Song, O.-S., 'Contour Error Analysis and PID Controller Design for Machining Center,' Journal of Control Automation and System Engineering, 02 Vol. 3, No. 1, pp. 32-39, 1997
  7. Joo, J.-H., Lee, H.-C., Lee, Y.-J. and Jeon, G.-J., 'A New Method of Contour Error Modeling for Cross-Coupled Control of CNC Machines,' Journal of Control, Automation and System Engineering, Vol. 3, No. 4, pp. 389-397, 1997