Abstract
The procedures to correct sampling biases for discontinuity data obtained from 1D survey line(borehole or scanline) is addressed. The Probability of intersection between the survey line and a circular discontinuity is considered, and a correction far orientation bias is developed assuming discontinuities as equivalent circular disks. The correction incorporates the effect of the angle between the direction of survey line and each discontinuity plane belonging to the discontinuity cluster, size of each discontinuity and length of the survey line. A procedure is provided to estimate unbiased discontinuity spacing parameters using the discontinuity spacing data based on the measurements carried out on a finite length of the survey line.
시추공 또는 선형조사선과 같은 1D측선에서 측정된 절리 자료의 샘플링 편향을 보정하는 절차를 기술하였다. ID 측선에서 절리가 관측될 수 있는 확률은 측선 방향에 대한 절리의 상대적인 방향 이외에도 절리 크기, 절리 모양 및 측선 길이 등의 복합적 요인에 의하여 결정될 수 있다. 본 연구에서는 절리의 모양을 원판형이라 가정하고 절리의 방향 및 크기에 의하여 나타날 수 있는 절리 자료의 방향 편향 효과를 동시에 보정할 수 있는 방법론을 제시하고, 현장적용을 통하여 방향 편향 보정이 절리군의 방향분포에 미치는 영향에 대하여 고찰하였다. 또한, 유한 길이의 측선으로부터 산정된 절리군의 간격분포는 샘플링 영역인 측선 길이에 따라 다르게 나타날 수 있으며, 이와 같은 간격 편향에 대한 보정절차를 기술하였다.