References
- Yang, C. Y. and Webb, R. L., 1996, Condensation of R-12 in small hydraulic diameter extruded aluminum tubes with and without micro-fins, Int. J. Heat Mass Trans., Vol. 39, No.4, pp. 791-800
- Webb, R. L. and Yang, C. Y., 1995, A comparison of R-12 and R-134a condensation inside small extruded aluminum plain and micro-fin tubes, C4961053195, IMechE, pp.77-86
- Akers, W. W., Deans, H. A. and Cosser, O. K., 1959 Condensation heat transfer within horizontal tubes, Chem. Eng. Progress Symp. Series, Vol. 55, No. 29, pp.171-176
- Shah, M. M., 1979, A general correlation for heat transfer during film condensation in tubes, Int. J. Heat Mass Transfer, Vol. 22, No. 4, pp. 547-556
- Kim, N. H., Cho, J. P. and Kim, J. O., 2000, R-22 condensation in flat aluminum multichannel tubes, J. Enhanced Heat Transfer, Vol. 7, pp. 427-438
- Farrell, P., Wert, K. and Webb, R. L., 1991, Heat transfer and friction characteristics of turbulator radiator tubes, SAE Technical Paper Series 910197
- Kline, S. J. and McClintock, F. A., 1953, The description of uncertainties in single sample experiments, Mechanical Engineering, Vol. 75, p. 3-9
- Carnavos, T. C., 1979, Cooling air in turbulent flow with internally finned tubes, Heat Transfer Engineering, Vol. 1, No. 2, pp. 41-46
- Wijaya, A. and Spatz, M. W., 1994, Two-phase flow condensation heat transfer and pressure drop characteristics, Proceedings of 1994 International Refrigeration Conference at Purdue, pp.305-310
- Kwon, J. T., Park, S. K. and Kim, M. H., 2000, Enhanced effect of a horizontal microfin tube for condensation heat transfer with R22 and R410A, J. Enhanced Heat Transfer,Vol. 7, pp. 97-107
- Yang, C. Y. and Webb, R. L., 1997, A predicted model for condensation in small hydraulic diameter tubes having axial microfins, J. Heat Trans., Vol. 119, pp.776-782
- Zivi, S. M., 1964, Estimation of steady state steam void fraction by means of principle of minimum entropy production, J. Heat Trans., Vol. 86, pp. 237-252
- Tang, L., Ohadi, M. M. and Johnson, A. T., 2000, Flow condensation in smooth and micro-fin tubes with HCFC-22, HFC-134a and HFC-410A refrigerants, J. Enhanced Heat Transfer, Vol. 7, pp. 289-310
- Webb, R. L., 1998, Prediction of condensation and evaporation in micro-fin and microchannel tubes, In: Kakac, S., Bergles, A. E., Mayinger, F. and Yuncu, H., editors, Heat transfer enhancement of heat exchangers: Kluwer Academic Publishers, pp. 529-550
- Moser, K., Webb, R. L. and Na, B., 1998, A new equivalent Reynolds number model for condensation in smooth tubes, J. Heat Trans., Vol. 120, pp. 410-417
- Friedel, L., 1979, Improved friction pressure drop correlations for horizontal and vertical two phase pipe flow, Paper E2, EuropianTwo Phase Flow Group Meeting, Ispra, Italy