DOI QR코드

DOI QR Code

Development of Cold Forging Process for OP Shaft and Improvement of Forgeability of SNCM Steel

OP Shaft용 냉간 단조 성형 공정 개발 및 SNCM강의 단조성 향상에 관한 연구

  • 이광오 (부산대학교 정밀기계공학과 대학원) ;
  • 진민호 (부산대학교 정밀기계공학과 대학원) ;
  • 제진수 (경상대학교 수송기계 공학부) ;
  • 남원수 (현대자동차 소재금형기술부) ;
  • 강성수 (부산대학교 정밀기계공학과)
  • Published : 2003.08.01

Abstract

This study presents the enhancement of forgeability of SNCM522H materials. Target parts are output shaft(OP shaft) used as components of power train for automobiles. To carry out cold forging process of OP shaft by 1 pass instead of existing 2 pass process, studies in terms of process design and heat treatment were performed. To introduce the new process, the finite element method was accomplished, and to assess the validity of proposed heat treatment cycle, several experiments(hardness test, observation of optical microstructures, tensile test) were carried out. The 2Pass forging process could be reduced as lPass process through improvement of process and heat treatment technology and that would give cost reduction.

Keywords

References

  1. Kurt Lange, Handbook of Metal Forming, McGraw-Hill Book Company, 1985.
  2. 工蘇英明, 1981. "冷間鍛造のこれから", 塑性と加工., 第22卷, 第250號, pp. 1126-1128.
  3. 변상규, 제진수, 강범수., 1997, "다단계 자동차 부품 스플라인 소성가공 공정설계", 한국소성가공학회지, 제6권, 제1호, pp. 53-61.
  4. 김동진, 정덕진, 김병민, 최재찬., 1997, "자동차 냉방기용 내부 풀리의 냉간 단조 공정 설계", 한국자동차공학회 논문집, 제5권4호, pp. 199-206.
  5. 김영석, 김현수, 김찬일, 김영석., 2000, "토크 컴버터 임펠러 허브의 냉간 단조공정 설계", 한국정밀공학회지, Vol.17, No.11, pp. 213-219.
  6. 鋼の 熱處理, 日本鐵鋼協會編, 改訂 5版
  7. 小坂田宏, etc, 1977, "冷間塑性加 工條件における炭素鋼の廷性破壞(第2報, 金屬組織の影響)", 日本機械學會論文集, 第43卷, 第376号, pp. 4463-4471.
  8. 小坂田宏, etc, 1980, "冷間塑性加工條件における炭素鋼の廷性破壞(第3報, 塑性方法と變形履歷の影響)", 日本機械學會論文, 第46卷, 第407号, pp. 844-850.
  9. S.E.Clift, etc. 1990, "Fracture Prediction in Plastic Deformation Processes", Int. J. Mech. Sci,, Vol. 32, No.1, pp. 1-17. https://doi.org/10.1016/0020-7403(90)90148-C

Cited by

  1. Forgebility evaluation of SNCM 220 steel by warm compression test and microstructure behaviors characteristics vol.3, pp.1, 2016, https://doi.org/10.1007/s40684-016-0014-6