References
- Ashby,M.F., Evans,A., Fleck, N.A., Gibson, L.J., Hutchinson, J.W., and Wadley, H.N.G., 2000, "Metal Foams A Design Guide", Butterworlh Heinemann.
- Gibson, L. J., Ashby, M. F., 1997, "Cellular Solids: Structure and Properties", Second editions., Cambridge University Press, Cambridge, UK.
- Gradinger, R., Simancik, F., and Degischer, H.P., 1997, "Determination of Mechanical Properties of Foamed Metals", Welding technology, Vol.2, p. 701.
- Duarte, I. and Banhart, J., 2000, "A Study of Aluminium Foam Formation Kinetics and Microstructure", Acta Mater., Vol. 48, p. 2349. https://doi.org/10.1016/S1359-6454(00)00020-3
- Markaki, A.E., and Cltne,T.W., 2001, "The Effect of Cell Wall Microstructure on the Deformation and Fracture of Aluminium-based Foams", Acta mater, Vol. 49, p. 1677 https://doi.org/10.1016/S1359-6454(01)00072-6
- Banhart, J., Baumeister, J., Weber, M., 1998. "Metal Powder Technologies and Applications", In: ASM handbook, Vol. 7. Materials park, USA: ASM International, p. 1043.
- Baumgartner, F. and Gers, H. 1999, "Industrialization of P/M Foaming Process", Proc. of the 1st Int. Conf. on Metal Foams and Porous Metal Structures, MIT-Publishing, p. 73.
- Banhart, J., 2001, "Manufacture, Chracterisation and Application of Cellular Metals and Metal Foams", Progress in Materials Science., Vol. 46, p. 559. https://doi.org/10.1016/S0079-6425(00)00002-5
- Kriszt, B., Foroughi, B., Faure, K. and Degischer, H.P., 1999, "Deformaton behavior of aluminium foam under uniaxial compression (a case study)", Proc. of the 1st Int. Conf. on Metal Foams and Porous Metal Structures, MIT Publishing, p. 241.
- R. Kreese, 1999, "Characteristics and Handing of Titanium Hydride", Proc. of the 1st Int. Conf. on cetal Foams and Porous Metal Structures, MIT Publishing, p. 31.
- Baumeister, J., 1990, German Patent, DE 40 18 360.
- 이재건, 1996, "실무 고주파 가열", 진영사.
- URL: www.ameritherm.comloverview_heating.html.
- Jung, H.K and Kang C.G., 1999, "An Induction Heating Process with Coil Design imd Solutions Avoiding Coafsening Phenomena of Al 6pctSi 3 Pct Cu0,1 Pct Mg Alloy for Thixoforming", Metall. and mater. trans. A, Vol 30A, p. 1.
- Kang,C.G., Jung,H.K., and Jung, Y.J., 1999, "Coil Design of Inductive Heating and Reheating Process of Aluminium Alloys for Thixoforming", Advanced technology of Plasticity, VolⅢ, Proc.of the 6th ICTP, p. 1689.
- Kang, C.G., Youn, S.W., and Seo, P.K., 2002, "Reheating Process of Metal Matrix Composites for Thixorforming and Their Inductive Coil Design", J. Mater. Eng. & Perforrn, Vol.11( 2), p. 152. https://doi.org/10.1361/105994902770344213
- Kaparanos, P., Gibson, R.C., Kirwood, D.H., Sellars, C.M., 1996. "Induction Heating and Partial Melting of High Melting Point Thixoformable Alloys", Proc. of 4th Int. Conf. on Semi solid Processing of Alloys and Composites, Sheffield, p. 148.
- Boo Lee Therm Co. Ltd.(South Korea), Induction Heating Technical Report Data, 1994. (in Korean).
- Davies, E.J., 1990, "Conduction and Induction IIeating", Peter Peregrinus, London.
- Zinn, S. and Semiatin, S.L., 1988, "Coil Design and Fabrication: Part 2, Specialty Coils", Heat Treating, August, p. 29.
- Zinn, S. and Semiatin, S.L., 1988, "Coil Design and Fabrication: Part 3, Fabrication Principles", Heat treating, October, p. 39.
- Simansik, F., 1999, "Reproducibility of Aluminium Foam Properties", Proc. of the 1st Int. Conf. on cetal Foams and Porous Metal Structures, MIT Publishing, p. 235.
- Song, Z.L., Zhu, J.S., Ma, L.M., He, D.P., 2001, "Evolution of Foamed Aluminium Structure in Foaming Process", Mater. Sci & Eng., Vol. A298, p. 137.