Evaluation for the Strength and Erosion Rate on the Silicon Nitride Ceramics

질화규소 세라믹스의 강도와 침식도 평가에 관한 연구

  • 김부안 (부경대학교 신소재공학부)
  • Published : 2003.09.01

Abstract

An experimental method to investigate the fracture strength and fracture toughness for the silicon nitrides sintered at various sintering temperature is established. The erosion rate for these materials in the various concentration of NaOH solution is also investigated. In result, the fracture strength of Si3N4 is decreased with the increase of sintering temperature. On the other hand, the fracture toughness KIC is increased with the increase of sintering temperature. The erosion rate of silicon nitride in the NaOH solution depend largely on the grain size and the concentration of NaOH solution. The erosion rate of silicon nitride sintered at $1800^{\circ}C$ was much higher than that at $1950^{\circ}C$. These results are due to the unique columnar structure of silicon nitride.

Keywords

References

  1. JHPI v.30 no.1 Effect of Sintering Condition on Mechanical Properties of Silicon Nitride Kim,B.A.;Ando,K.
  2. Fatigue Fract. Engng. Struct v.17 no.2 Effect of Grinding on Cracks and the Strength of Ceramics Kim,B.A.;Ando,K.;Sato,S. https://doi.org/10.1111/j.1460-2695.1994.tb00800.x
  3. Fatigue Fract. Engng. Struct. v.16 no.3 A Fracture and Severity Analysis of Composite Ceramics Chu,M.C.;Ando,K. https://doi.org/10.1111/j.1460-2695.1993.tb00091.x
  4. 요업학회지 v.34 no.2 구조용 세라믹스 강도의 신뢰성 평가에 관한 연구 김부안;남기우
  5. 한국해양공학회지 v.15 no.2 세라믹스 파괴인성평가에 있어서 IF법과 AE 김부안;문창권
  6. J. of American Ceramic Society v.66 no.2 Controlled Flaws in Ceramics: A Comparision of Knoop and Vickers Indentation Marshall,D.B. https://doi.org/10.1111/j.1151-2916.1983.tb09989.x
  7. Fatigue Fract. Engng. Struct. v.15 no.2 process Zone Size Failure Criterion and Probabilistic Fracture Assessment Curves for Ceramics Ando,K.;Kim,B.A.;Iwasa,M.;Ogura,N. https://doi.org/10.1111/j.1460-2695.1992.tb00044.x
  8. Ceramics for High Performance Application II Williams,R.M.;Uy,J.C.
  9. Science Forum New Ceramics Powder Handbook Katou,N;Yamaguchi,K.
  10. Engng. Fract. Mech v.15 An Empirical Stress-Intensity Factor Equation for the Surface Crack Newman,J.C.;Raju,I.S. https://doi.org/10.1016/0013-7944(81)90116-8
  11. Ceramic Engineering Handbook Japan Ceramic Society
  12. Tailoring Ceramic Composites Kagawa,Y.;Hata,H.
  13. 엔지니어링 세라믹스 -기계구조용 파인세라믹스- 이홍림