References
- 부산대학교 석사학위논문 핀틀형 노즐의 팁형상에 따른 분사특성 및 글로우 플러그 충돌효과에 관한 연구 조래희
- SAE paper 740715 Fuel Droplet Size Distribution in Diesel Combustion Chamber Hiroyasu,H.;Kadota,T.
- SAE paper 790494 On the Dependence of Spray Angle and Other Spray Parameters on Nozzle Design an Operating Conditions Reitz,R.D.;Bracco,F.B.
- Ph.D.Thesis,Department of Mechanical and Aerospace Engineering Atomizing Round Jets Wu,K.J.
- ILASS America 92 Mechanism of Air-Assisted Liquid Atomization Liu,A.B.;Reitz,R.D.
- ILASS America 91 Atomization Mechanism of Fuel Injection Huh,K.Y.;Gosman,A.D.
- SAE paper 980811 Analysis of the Flow in the Nozzle of a Vertical Multi-Hole Diesel Engine Injector Arcoumanis,C.;Gavaises,M.;Nouri,J.M.;Wahab,E.;Horrocks,R.
- J. Research Nat.Bur.Standards v.6 The Mechanism of the Atomization of Liquid Castleman Jr.;R. A. https://doi.org/10.6028/jres.006.023
- J. Applied Physics v.8 Mechanism of Disintegration of Liquid Jets Schweitzer,P.H. https://doi.org/10.1063/1.1710333
- 한국과학기술원 박사학위논문 두개의 와류분무노즐에서 분사되는 이중분무의 특성에 관한 연구 김인구
- 대한기계학회논문집(B) v.20 no.6 연료노즐 내부유동 현상의 수치해석 구자예;박장혁;오두석;정홍철
- JSME v.56 no.528 Disintegrating Progress of a Liquid Jet and Internal Flow in a Nozzle Shimizu,M.;Arai,M.;Hiroyasu,H. https://doi.org/10.1299/kikaib.56.2519
- International Journal of Turbo and Jet Engine v.6 Influence of Gas-Injector Geometry on Atomization Performance of Aerated-liquid Nozzles Wang,X.F.;Chin,J.S.;Lefebvre,A.H.
- 대한기계학회논문집 (B) v.21 no.12 노즐분공내 유체충돌이 있는 디젤노즐의 유동 및 분무특성 연구 하성업;김흥열;류구영;구자예
- 대한기계학회논문집 v.19 no.1 충돌판에 의한 분무의 공간분포에 관한 실험적 연구 차건종;김덕줄
- Ph. D. Thesis,Department of Mechanical Engineering Characteristics of a Transient Diesel Fuel Spary Koo,J.Y.
- Prog. Energy Comb. Sci. v.13 Mixing, Transport and Combustion in Sprays Faeth,G.M. https://doi.org/10.1016/0360-1285(87)90002-5