초록
일반적으로 MR Angiography(MRI)는 사전 포화방법(presaturation)을 이용하여 동맥과 정맥의 분리된 영상을 획득한다. 하지만 이러한 일반적인 사전포화방법으로 동맥과 정맥영상을 획득하기 위해서는 두 번의 영상획득이 필요하다. 따라서 본 연구에서는 동맥과 정맥의 구분된 영상을 한번의 영상획득으로 얻을 수 있는 SAAV 기법을 0.3T MRI system에 적용하고, 획득한 동맥과 정맥의 두 MRA 영상을 Colot-Mapping으로 동$.$정맥을 한 영상에 구분하여 나타냄으로써 0.3T MRI system에서 MRI의 임상적 적용 및 활용 가능성을 높이고자 하였다. 마산 삼성병원의 0.3T MRI system (Magfinder, AILab. Korea)어서 SAAV sequence를 이용하여 정상적인 피험자로부터 목 부위의 동맥과 정맥 혈관영상 (volume : 256${\times}$256${\times}$64)을 동시에 얻었다. 그리고. 이들의 각 2D 영상들에서 위치정보를 획득한 후 MIP 기법과 Color Mapping으로 조합하여 3D Artery-Vein Color Mapping(AVCM) MRA 영상으로 재구성하였다.
The method of simultaneous data acquisition of arteries and veins(SAAV) was suggested to obtain MR angiography of arteries and veins at 0.3T low filed MRI system (Magfinder, AlLab. Korea). Two separated artery- and vein-images were put together using AVCM(Artery-Vein Color Mapping) algorithm and presented in the same image. In this study, artery- and vein-separated angiograms of volunteer's neck were obtained. Two dimensioal blood-enhanced images wre sequentially obtained using SAAV pulse sequence based on time-of-flight(TOF) method with flow compensation. Imaging parameters were TR/TE=70/12msec. FOV=230mm, slice thickness = 3mm, flip angle=90$^{\circ}$, matrix size=256${\times}$256${\times}$64mm. TSat TH/SPA=15/20mm, Ts_v=10msec and Ts_a=40ms. 3D MRA images were reconstructed using the maximum intensity projection(MIP) and the artery-vein color mapping(AVCM) algorithm. This study showed good possibility of clinical applications of MRA in 0.3T which provides valuable diagnostic information of clinical vascular diseases.