한국표면공학회지 (Journal of the Korean institute of surface engineering)

  • 제36권4호
  • /
  • Pages.339-346
  • /
  • 2003
  • /
  • 1225-8024(pISSN)
  • /
  • 2288-8403(eISSN)
한국표면공학회 (The Korean Institute of Surface Engineering)
권호 표지

치과 및 의료용 스테인리스강선의 표면특성

Surface Characteristics of Stainless Steel Wire for Dental and Medical Use

  • 최한철 (조선대학교 치과대학 치과재료학교실 및 생체재료나노계면활성화센터) ;
  • 고영무 (조선대학교 치과대학 치과재료학교실 및 생체재료나노계면활성화센터)
  • 발행 : 2003.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Stainless steel wire has been used in industry, dental and medical parts. Especially, it has been used widely for the dental orthodontic materials. The orthodontic wire requires good mechanical properties, such as elastic strength, combined with a high resistance to corrosion. To increase elastic strength and good corrosion resistance, drawing methods(one-step and two-step drawing) have been used and the electrochemical characteristics of drawed wire have been researched using potentiodynamic method in 0.9％NaCl and field emission scanning electron microscope. The one-step drawed wire showed the formation of rough surface. The hardness and tensile strength of two-step drawed wire increased. For the case of two-step drawed wire, the corrosion resistance and pitting potential increased compared with one-step drawed wire due to the drawing induced small surface roughness, such as scratch. The passivation and active current density decreased as the reduction in area for drawing increased.

키워드

참고문헌

  1. W. J. O'Brein, G. Ryge, An outline of dental materials and their selection, Philadelphia, W. B Saunders Co., (1978) 307
  2. R. W. Philips, Science of dental materials. 7th ed., Philadelphia, W.B.Saunders Co., (1973) 653
  3. W. A. Backofen, G. F. Gales, Am. J. Orthod., 38 (1952) 755 https://doi.org/10.1016/0002-9416(52)90056-0
  4. C. A. Funk, Angle Orthod., 21 (1951) 129
  5. G. Y. Richman. Am. J. Orthod., 42 (1956) 573 https://doi.org/10.1016/0002-9416(56)90099-9
  6. N. G. Gaston, Am. J. Orthod., 37(1951) 779 https://doi.org/10.1016/0002-9416(51)90049-8
  7. G. L. Howe, E. H. Greener, D. S. Crimmins, Angle Orthod., 38 (1968) 244
  8. R. W. Kohl, Angle Orthod., 34 (1964) 37
  9. M. R. Marcotte, J. Dent. Res., 52 (1973) 1171 https://doi.org/10.1177/00220345730520060201
  10. J. V. Wilkinson, Am. J. Orthod., 48 (1962) 194
  11. R. G. Craig, H. J. Slesnick, F. A. Peyton, J. Dent. Res., 44 (1965) 587 https://doi.org/10.1177/00220345650440032401
  12. G. F. Andreasen, F. R. Queredo, J. Biomaterials., 3 (1970) 151
  13. E. C. Bain, R. H. Abom, J. J. B. Rutherfold. Trans. Amer. Soc. Steel Treat, 21 (1933) 481
  14. H. C. Choe, K. H. Kim, J. of the Korean Instituteof Metals and Materials, 24 (1986) 1190
  15. Z. Szklarska-Smialowska. Pitting corrosion of metals,NACE, Houston, (1996) 90
  16. H. C. Choe, K. H. Kim, J. of the Corrosion Science Society of Korea, 24 (1995) 3