DOI QR코드

DOI QR Code

볼 압입 시험의 기하학적 조건과 유동 응력 곡선의 관계에 관한 연구

Evaluation of Flow Stress using Geometric Conditions of Ball Indentation Tests

  • 이병섭 (한국원자력연구소 원자력재료기술개발부) ;
  • 이호진 (한국원자력연구소 원자력재료기술개발부) ;
  • 이봉상 (한국원자력연구소 원자력재료기술개발부)
  • 발행 : 2003.07.01

초록

Ball indentation tests have been used to estimate the mechanical properties of materials by several investigators. In this study, load-depth curves from ball indentation tests were analyzed using the geometric conditions of the contact between ball and specimen. A series of numerical calculations and experimental results showed that the contact load-depth curves could be simplified by linear functions. Once we obtained the contact indentation depth from linearizing the experimental indentation curves, the estimation process of the flow properties became straight-forward and the scatter of results could be drastically reduced.

키워드

참고문헌

  1. KS 규격집 금속재료의 계장화 압입시험- 압입 인장 물성 평가
  2. The hardness of metals D.Tabor
  3. ASTM STP 1204 In-Situ Measurements of Mechanical Properties Using Novel Automated Ball Indentation System F.M.Haggag
  4. 대한 금속·재료학회지 v.38 no.12 압입하중-변위곡선의 해석을 통한 재료의 소성 유동특성 평가 안정훈;최열;권동일
  5. 대한기계학회논문집 A 권 v.25 no.11 유한요소해에 기초한 물성평가 압입이론 이형일;이진행
  6. Int. J. Pres. Ves. & Piping v.74 Measurement of through-the-thickness variations of mechanical properties in SA508 Gr.3 pressure vessel steels using ball indentation test technique T.S.Byun;J.H.Hong;F.M.Haggag;K.Farrell;E.H.Lee https://doi.org/10.1016/S0308-0161(97)00114-2
  7. Int. J. Eng. Sci. v.3 no.1 The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitarary profile I.N.Sneddon https://doi.org/10.1016/0020-7225(65)90019-4
  8. ABAQUS Manual (Ver6.3)
  9. 대한 금속·재료학회지 v.41 no.2 인장물성 평가를 위한 연속압입시험법의 실험조건 최적화 전은채;박주승;권동일
  10. J. mat. sci. v.34 Non-destructive studies on tensile and fracture properties of molybdenum at low temperaturess M.D.Mathew;K.L.Murty https://doi.org/10.1023/A:1004547709783
  11. Acta. Meterialia v.51 Determination of plastic properties of metals by instrumented indentation using different sharp indenters J.L.Bucaille;S.Stauss;E.Felder;J.Michler https://doi.org/10.1016/S1359-6454(02)00568-2

피인용 문헌

  1. A Study on the Unloading Stiffness of Instrumented Indentation Tests vol.13, pp.1, 2004, https://doi.org/10.5228/KSPP.2004.13.1.021