Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

A Study on the Reducing the Return Line Pressure Fluctuation of the Hydraulic Breaker System

유압 브레이커의 리턴 라인의 압력 맥동 감소에 관한 연구

  • 성원준 (한양대학교 대학원 정밀기계공학과) ;
  • 노태봉 (한양대학교 대학원 정밀기계공학과) ;
  • 송창섭 (한양대학교 기계공학부)
  • Published : 2003.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, the hydraulic breaker system was analyzed and simulated using. The simulation result was certified comparing with the experimental result. From the parametric analysis, the effects of each factor were revealed. Through the simulation with varying parameters, the method to reduce the return line pressure fluctuation was presented.

Keywords

References

  1. Herbert E. Merrit, Hydraulic Control Systems, John Wiley & Sons, 1967
  2. Lee, H. S., 'A Study on the Design Parameter of Hydraulic Breaker,' Master's Thesis of Hanyang Univ., 1989
  3. Ko, S. H., Lim, J. H., 'Modeling and Analysis of a Hydraulic Breaker Considering Elastic Impact between the Piston and the Chisel,' Trans. KSME, Vol. 19, No. 2, pp.338-347, 1995
  4. Choi, K. H., Sung, W. J., Song, C. S., 'A Study on the Performance Improvement of the Hydraulic Breaker,' Trans. METRIC of Hanyang Univ., Vol. 5, No. 1, pp.57-64, 1999
  5. Lee, Y. K., Sung, W. J., Song, C. S., 'The Development of an Analysis Tool and the Performance Analysis of a Hydraulic Breaker System,' J. of the KSPE, Vol. 17, No. 4, pp.189-196,2000
  6. John Watton, Fluid Power Systems, Prentice Hill, 1989