초록
본 논문에서는 3 포트 RF 수동부품에서 발생하는 IM 모델을 제안하였다. 제안한 모델을 이용하여 전향 및 후향측정법의 PIM을 계산하였고 계산된 결과를 검증하기 위하여 3 포트 N 타입 커넥터의 측정결과와 비교하였다. 전향 IM의 측정값은 -123 dBc(at 43 dBm)로 계산결과와 비교하여 최대 약 2.5 dB의 차이를 보이며, 후향 IM의 측정값은 평균 -130 dBc(at 43 dBm)로 계산결과와 최대 약 3 dB의 차이로 전향 및 후향 IM의 계산값과 측정값이 잘 일치하였다 또한 전향 IM이 후향 IM보다 케이블 길이, 접합부 IM 등의 변화에도 3차 IM 주파수 범위에서 일정한 값을 갖는 것을 확인할 수 있었다. 제안한 모델을 사용해 3 포트 RF 수동부품의 전향과 후향 IM을 예측할 수 있고, PIM 저 감화를 위한 원인분석 등에 유용하게 사용할 수 있을 것으로 기대된다.
This paper presents IM model which is produced in 3 port RF passive component. We calculated forward and reflect PIM of 3 port component by using the model. And they are reasonable agreement with measurement result like below. In the case of forward IM, calculated result is -122 dBc(at 43 dBm), which differ 2.5 dB with measurement result. And reflected IM, the average calculated result is -130 dBc(at 43 dBm), which differ 3 dB with measurement result. The results which are calculated and measured under various condition(IM source level, frequency sweep, contour length, etc.) show that forward method gets more fixed result than that of reflect. Consequently, PIM of 3 port component is predicted and analyzed for desensitizing by the proposed model.