References
- Ahn, S. W., Kim, K. C. and Lee,Y. P., 1994, 'Fully Developed Turbulent Flow and Heat Transfer in Concentric Annuli With Square-Ribbed Roughness,' Trans. KSME, Vol. 18, No. 4, pp. 1072-1088
- Bergles, A. E., 1980, Heat Transfer Characteristics of Turbotec Tubing, Heat Transfer Laboratory Report HTL-24 ISU-ERI-Ames-81018, Iowa State University
- Garimella, S., 1990, Experimental Investigation of Heat Transfer and Pressure Drop Characteristics of Annuli With Spirally Fluted Inner Tubes, Ph. D. Dissertation, The Ohio State University
- Garimella, S. and Christensen, R. N., 1993, 'Experimental Investigation of Fluid Flow Mechanisms in Annuli with Spirally Fluted Inner Tubes,' ASHRAE Trans, Vol. 99, Part 1, pp. 1205-1216
- Garimella, S. and Christensen, R. N., 1995a, 'Heat Transfer and Pressure Drop Characteristics of Spirally Fluted Annuli: Part Ⅰ- Hydrodynamics ,' ASME Journal of Heat Transfer, Vol. 117, No. 54, pp. 54-60 https://doi.org/10.1115/1.2822323
- Garimella, S. and Christensen, R. N., 1995b, 'Heat Transfer and Pressure Drop Characteristics of Spirally Fluted Annuli: Part Ⅱ- Heat Transfer,' ASME Journal of Heat Transfer, Vol. 117, No. 54, pp. 61-68 https://doi.org/10.1115/1.2822324
- Kays, W. M., Crawford, M. E., 1993, Convective Heat and Mass Transfer, McGraw-Hill Co., pp. 138-152
- Kays, W. M. and Leung, E. Y., 1963, 'Heat Transfer in Annular Passages: Hydrodynamically Developed Flow with Arbitrarily Prescribed Heat Flux,' Int. J. Heat Mass Transfer, Vol. 6, pp. 537-557 https://doi.org/10.1016/0017-9310(63)90012-7
- Kline, S. J. and McClintock, F. A., 1953, 'Describing Uncertainties on Single Sample Experiments,' Mechanical Engineering, Vol. 57, pp. 3-8
- Lawn, C. J., 1974, 'The Use of an Eddy Viscosity Model to Predict the Heat Transfer and Pressure Drop Performance of Roughened Surfaces,' Int, J. Heat Mass Transfer, Vol. 17, pp. 421-428 https://doi.org/10.1016/0017-9310(74)90013-1
- Marto, P. J., Reilly, R. J. and Fenner, J. H., 1979, 'An Experimental Comparison of Enhanced Heat Transfer Condenser Tubing in: Advance in Heat Transfer,' ASME, NewYork, pp. 1-9
- Nakayama, W., Takahashi, K. and Daikoku, T., 1983, 'Spiral Ribbing to Engance Single Phase Heat Transfer Inside Tubes,' ASME-JSME Thermal Engineering Joint Conference Proceedings, Honolulu, HI, Vol. 1, pp. 365-372
- Petukhov, B.S., 1970, Heat Transfer and Friction in Turbulent Pipe Flow Variable Physical Properties, in : Advance in Heat Transfer, T. F. Irvine, and J. P. Hartnett, Vol. 6, Academic Press
- Petukhov, B. S. and Popov, V. N., 1963, 'Theoretical Calculation of Heat Exchange and Frictional Resistance in Turbulent Flow in Tubes of an Incompressible Fluid With Variable Physical Properties,' High Temperature, Vol. 1, pp. 69-83
- Ravigururajan, T. S. and Bergles, A. E., 1985, 'General Correlation for Pressure Drop and Heat Transfer for Single Phase Turbulent Flow in Internally Ribbed Tubes, in : Augumentation of Heat Transfer in Energy System,' ASME-HTD-Vol. 52, pp. 9-20
- Wilkie, D., 1966, 'Forced Convection Heat Transfer from Surface Roughened by Transverse Ribs,' 3rd International Heat Transfer Conference, Chicago, Illinois, Vol. 1, p. 19
- Withers, J. G., 1980a, 'Tube-Side Heat Transfer and Pressure Drop for Tubes Having Helical Internal Riding With Turbulent/Transitional Flow of Single Phase Fluid, Part 1. Single-Helix Ridging,' Heat Transfer Engineering, Vol. 2, No. 1, pp. 48-58 https://doi.org/10.1080/01457638008962750
- Withers ,J. G., 1980b, 'Tube-Side Heat Transfer and Pressure Drop for Tubes Having Helical Internal Ridging with Turbulent/Transitional Flow of Single Phase Fluid, Part 2. Multiple Helix Ridging,' Heat Transfer Engineering, Vol. 2, No. 2, pp. 43-50 https://doi.org/10.1080/01457638008962755