Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Development of an Automated Design System of a Large Pressure Vessel using the Steel, 34CrMo4

강재(34CrMo4)를 사용한 대형 고압가스 용기의 설계 자동화 시스템 개발

  • 김지훈 (부산대학교 정밀기계공학과) ;
  • 김의수 (부산대학교 정밀기계공학과) ;
  • 김철 (부산대학교 기계기술연구소) ;
  • 최재찬 (부산대학교 기계공학부)
  • Published : 2003.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper describes a research work on the development of computer-aided design system for deep drawing & ironing of a high pressure vessel. An approach to the system is based on the knowledge-based rules. Knowledge for the system is formulated from plasticity theories, handbook, experimental results and empirical knowledge of field experts. An attempt is made to link programs incorporating a number of expert design rules with the process variables obtained by commercial FEM software, DEFORM and ANSYS, to form a useful package. It is composed of five main modules, which are calculation of product thickness, input, production feasibility check, process planning, and autofrettage process modules and two submodules, which are folding check and process variable verification submodules. Programs for the system have been written in AutoLISP on the AutoCAD 2000 using personal computer. The developed system makes it possible to design and manufacture large high pressure vessel requiring D.D.I. process more efficiently.

Keywords

References

  1. Yoon, J. H., Jung, S. Y., Choi, Y., Kim, C., Choi, J. C., 'A Study on the Development of Computer-Aided Process Planning System for the Deep Drawing & Ironing of High Pressure Gas Cylinder,' Journal of the Korean Society of Precision Engineering, Vol. 19, No.2, pp. 177-186, 2002
  2. Schmid, W. and Reissner, J., 'Critical Deformation In The Ironing of Deep-Draw Cups,' Int. J. Mech., pp. 597-604, 1982
  3. Brochure of Fielding Co. Ltd, UK, 1998
  4. Iliescu, C., Cold-Pressing Technology, pp. 257-398, 1990
  5. Yeo, H. T., Hur, K. D., Choi, Y., 'Stress Analysis of the Prestressed Dies by Using FEM,' Journal of the Korean Society of Precision Engineering, Vol. 16, No. 6, pp. 114-122, 1999
  6. Mi, X., Yang, Y., Liang, Y., Experimental Study on Ironing of Stainless Steel and Optimization of Process Parameters, pp. 1653-1656, 1993
  7. Jun, G. C., Forming of Sheet Metal, Ban Do, pp. 155-177,1993
  8. Avitzur, B., Handbook of Metal-Forming Processes, pp. 581-739, 1983
  9. Kim, D. W., Theory of Plasticity, pp. 311-315, Cheong Moon Gak, 2001
  10. Jun, S. M., Suh, E. K., Shim, H. B., Kim, T. W., Lee, B. Y., 'An Analysis of Bolted Opening Structure and Development of Analysis Expert System Using ANSYS,' Trans KSME A, Vol. 17, No.4, pp. 731-742,1998
  11. Kim, E. S., Kim, J. H., Park, Y. S., Kim, C., Choi, J. C., 'Development of an Automated Design System of CNG Composite Vessel using Steel Liner Manufactured by D.D.I Process,' Journal of the Korean Society of Precision Engineering, Vol. 20, No. 1, pp. 205-213, 2003