Journal of the Computational Structural Engineering Institute of Korea (한국전산구조공학회논문집)

Computational Structural Engineering Institute of Korea (한국전산구조공학회)
권호 표지

Determination of Equivalent Vehicle Load Factors for Flat Slab Parking Structures Using Artificial Neural Networks

인공 신경망을 이용한 플랫 슬래브 주차장 구조물의 등가차량하중계수

  • 곽효경 (한국과학기술원 환경공학과) ;
  • 송종영 (한국과학기술원 환경공학과)
  • Published : 2003.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, the effects of vehicle loads on flat slab system are investigated on the basis of the previous studies for beam-gilder parking structural system. The influence surfaces of flat slab for a typical design section are constructed lot the purpose of obtaining maximum member forces under vehicle loads. In addition, the equivalent vehicle load factors for flat slab parking structures are suggested using artificial neural network. The network responses we compared with the results obtained by numerical analyses to verify the validation of Levenberg-Marquardt algorithm adopted as training method in this Paper. Many parameter studies for the flat slab structural system show dominant vehicle load effects at the center positive moments in both column and middle strips, like the beam-girder parking structural system.

이 논문에서는 기존의 보-거더 구조계 주차장 구조물에 대한 차량하중영향 연구를 토대로, 플랫 슬래브 구조계에서 차량하중영향에 대한 연구를 수행하였다. 먼저, 최대부재력을 일으키는 차량하중의 적용을 위해 플랫 슬래브의 주요 설계지점에 대한 영향면을 구성하였으며, 플랫 슬래브의 등가차량하중계수를 인공 신경망기법을 이용하여, 슬래브 두께, 지판 두께, 지판 크기, 슬래브의 단변, 장변 길이 등 주요구조변수로 제시하였다. 사용된 신경망의 훈련은 많은 패턴수를 갖는 비선형 회귀분석에 적합한 Levenberg-Marquardt 알고리즘을 이용하였으며 해석결과와 인공 신경망의 출력의 비교를 통해 알고리즘의 유효성을 검증하였다. 플랫 슬래브 구조계의 등가차량하중계수를 살펴보면, 보-거더 구조계의 경우와 유사하게 주열대와 중간대의 정모멘트 부재력에서 차량하중에 매우 취약함을 알 수 있었다.

Keywords

References

  1. J. S. Arora, Introduction to Optimum Design, McGraw-Hill Book Company, New York, 1989
  2. 김기화, 'Topology based Design', 대한조선학회지, 제35권, 제3호, 1998, pp.66-70
  3. B. Hassani and E. Hinton, Homogenization and Structural Topology Optimization : Theory, Practice and Software, Springer, 1998
  4. M. P. Bendsoe and N. Kikuchi, 'Generating Optimal Topology in Structural Design Using a Homogenization Method', Computer Methods in Applied Mechanics and Engineering, Vol. 71, 1988, pp.197-224 https://doi.org/10.1016/0045-7825(88)90086-2
  5. K. Suzuki and N. Kikuchi, 'A Homogenization Method for Shape and Topology Optimization', Computer Methods in Applied Mechanics and En-gineering, Vol. 93, 1991, pp.291-318 https://doi.org/10.1016/0045-7825(91)90245-2
  6. 김병수, 서명원, '최적조건법에 의한 위상 최적화 연구', 한국자동차공학회논문집, 제7권, 제8호, 1998, pp.224-232
  7. B. Hassani and E. Hinton, 'A Review of Homo-genization and Topology Optimization III - Topology Optimization Using Optimality Criteria', Computers and Structures, Vol. 69, 1998, pp.739-756 https://doi.org/10.1016/S0045-7949(98)00133-3
  8. F. Belblidia, J. E. B. Lee, S. Rechak and E. Hinton, 'Topology Optimization of Plate Structures Using a Single- or Three-Layered Artificial Material Model', Advances in Engineering Software, Vol. 32, 2001, pp.159-168 https://doi.org/10.1016/S0045-7949(00)00141-3
  9. O. K. Lim and J. S. Lee, 'Structural Topology Optimization for the Natural Frequency of a Designated Mode', KSME Interantional Journal, Vol. 14, No. 3, 2000, pp.306-313
  10. 임오강, 이진식, '체스판무늬 형성 방지책을 이용한 위상 최적설계', 한국전산구조공학회, Vol. 12, No. 2, 1999, pp.141-148
  11. J. H. Yoon, N. Kikuchi and J. L. Volakis, 'Structural Optimization in Magnetic Devices by the Homogenization Design Method', IEEE Transactions on Magnetics, Vol. 36, No. 3, 2000, pp.574-580 https://doi.org/10.1109/20.846220
  12. G. P. Steven, Q. Li, Y and M. Xie, 'Evolutionary Topology and Shape Design for General Physical Field Problems', Computational Mechanics, Vol. 26, 2000, pp.129-139 https://doi.org/10.1007/s004660000160
  13. R. J. Yang, C. H. Chuang and X. D. Che, 'Recent Application of Topology Optimization', American Institute of Aeronautics and Astronautics, Vol. 4849, 1998, pp.1093-1098
  14. S. Y. Han, 'An Improved Element Removal Method for Evolutionary Structural Optimization', KSME International Journal, Vol. 14, No. 9, 2000, pp.913-919
  15. O. M. Querin, G. P. Steven and Y. M. Xie, 'Evolutionary Structural Optimization using an Additive Algorithm', Finite Elements in Analysis and Design, Vol. 34, 2000, pp.291-308 https://doi.org/10.1016/S0168-874X(99)00044-X
  16. R. J. Yang and C. H. Chuang, 'Optimal Topology Design using Linear Programming', Computers & Structures, Vol. 52, No. 2, 1994, pp.265-275 https://doi.org/10.1016/0045-7949(94)90279-8