Korea-Australia Rheology Journal

  • 제15권2호
  • /
  • Pages.63-73
  • /
  • 2003
  • /
  • 1226-119X(pISSN)
  • /
  • 2093-7660(eISSN)
한국유변학회 (The Korean Society of Rheology)
권호 표지

Study of shear and elongational flow of solidifying polypropylene melt for low deformation rates

  • Tanner, R.I. (School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney) ;
  • Kitoko, V. (School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney) ;
  • Keentok, M. (School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney)
  • 발행 : 2003.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

An experimental technique was developed to determine the strain-rate in a tensile specimen. Then one can calculate the transient isothermal elongational viscosity. Both shear and elongational viscosities were measured to study the effect of shear and elongational fields on the flow properties. The comparison between these viscosities shows that the onset of rapid viscosity growth as crystallization solidification proceeds occurs at about the same value of time at very small deformation rates (0.0028 and 0.0047 $s^{-1}$). The comparison of these measured viscosities as functions of shear and elongational Hencky strains also reveals that the onset of rapid viscosity growths starts at critical Hencky strain values. The behaviour of steady shear viscosity as function of temperature sweep was also explored at three different low shear rates. Finally, the influence of changing oscillatory frequencies and strain rates was also investigated.

키워드

참고문헌

  1. J.materials Science v.19 High modulus filaments of polyethylene with lamellar structure by melt processing : the role of the high molecular weight component Bashir,Z.;A.Odell;A.Keller https://doi.org/10.1007/BF02396944
  2. Macro molecules v.3 Crystallization of polyolefins from rheological measurements. Relation between the transformed fraction and the dynamic moduli Boutahat,K.C.Carrot;J.Guillet
  3. Polymer v.44 no.3 Influence of pre-shearing on the crystallization of conventional and metallocene polythylense Chai,C.K.;Q.Auzoux;H.Randrianatoandro;P.Navard;J.M.Haudin https://doi.org/10.1016/S0032-3861(02)00773-5
  4. Structure Decelopment during polymer processing Cunha,A.M.;J.S.Godinho;J.C.Viana;Cunha.A.M.(ed.)Stoyko Fakirov(ed.)
  5. J Appl.Polym.Sci v.18 Rheology in polymer processing Han C.D. https://doi.org/10.1002/app.1974.070181208
  6. J.Res.Natl.Bur.Stand v.65A Crystallisation of bulk polymers with chain folding : theory of growth of lamellar spherulites Hoffman,J.D.;J.I.Jr.Lauritzen https://doi.org/10.6028/jres.065A.035
  7. Processing of polymers, Material Science and Technology : A Comprehensive treatment v.18 Flow-induced orientation and structure formation keller,A.;J.W.H.Kolnaar;H.E.H.Meijer(ed.)
  8. Polymer v.43 Influence of shear on polypropylene crystallization : morpholofy development and kinetics Koscher,E.;R.Fulchiron https://doi.org/10.1016/S0032-3861(02)00628-6
  9. Macromolecules v.32 Shear-enhanced crystallization in isotactic polypropylene. 1. Correspondence between in situ rheo-optics and ex situ structure determination Kumaraswamy,G.;A.M.Issaian;J.A.Kornfield https://doi.org/10.1021/ma990772j
  10. J.Polym.Eng.Sci. v.B16 An experimental study of the kinetics of polymer crystallization during shear flow Lagasse,R.;B.Maxwell
  11. J.Res.Natl.Bur.Stand v.A64 Theory of formation of polymer crystals with folded chains in dilute solution Lauritzen,J.I.Jr.;J.D.Hoffman
  12. J.Materials Science v.10 Flow-induced crystallization of polyethylene melts. Mackley,M.R.Frank;A.Keller https://doi.org/10.1007/BF01031850
  13. Rheology : principles, measurements and applications Macosko,C.W.
  14. J.Polymer Science v.17 The crystalline core of the row structures in isotactic polystyene, (i). Nucleation and growth Petermann,J.M.Miles;H.Gleiter
  15. Engineering Rheology(2nd edition) Tanner,R.I.
  16. J.Non-Newtonian Fluid Mechanics v.102 A suspension model for low shear rate polymer solidification Tanner,R.I. https://doi.org/10.1016/S0377-0257(01)00189-6
  17. Korea-Australia Rheol.J. v.14 no.2 Note on the beginnings of sinusoidal testing methods Tanner,R.I.
  18. Ph.D thesis.University of minho Mechanical characterisation of inejection moulded plates Viana,J.M.
  19. Rheol. Acta v.35 A rheological study of shear induced crystallization Vleeshouwers,S.;H.E.H.Meijer https://doi.org/10.1007/BF00368990
  20. ⅩⅢth International Congress on Rheology v.1 Shear-induced crystallisation of polypropylene melts Wassner,E.;R.D.Maier