소성∙가공 (Transactions of Materials Processing)

  • 제12권1호
  • /
  • Pages.49-59
  • /
  • 2003
  • /
  • 1225-696X(pISSN)
  • /
  • 2287-6359(eISSN)
한국소성∙가공학회 (The Korean Society for Technology of Plasticity and materials processing)
권호 표지
DOI QR코드

DOI QR Code

하이브리드 박막/쉘 방법을 이용한 박판성형공정의 스프링백 해석

Spring-Back Prediction for Sheet Metal Forming Process Using Hybrid Membrane/shell Method

  • 발행 : 2003.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

To reduce the cost of finite element analyses for sheet forming, a 3D hybrid membrane/shell method has been developed to study the springback of anisotropic sheet metals. In the hybrid method, the bending strains and stresses were analytically calculated as post-processing, using incremental shapes of the sheet obtained previously from the membrane finite element analysis. To calculate springback, a shell finite element model was used to unload the final shape of the sheet obtained from the membrane code and the stresses and strains that were calculated analytically. For verification, the hybrid method was applied to predict the springback of a 2036-T4 aluminum square blank formed into a cylindrical cup. The springback predictions obtained with the hybrid method was in good agreement with results obtained using a full shell model to simulate both loading and unloading and the experimentally measured data. The CPU time saving with the hybrid method, over the full shell model, was 75% for the punch stretching problem.

키워드

참고문헌

  1. Int. J. Mech. Sci. v.36 no.3 Springback in Plane Strain Stretch/Draw Sheet Forming F.Pourboghrat;E.Chu
  2. Proceedings of Plasticity 97, the 6th International Symposium on Plasticity and Its Current Applications A Hybird Membrane/Shell Method for Rapid Estimation of Stamped Anisotropic Sheet Metals F.Pourboghrat.;J.W. Yoon;K. Chung
  3. ASME Journal of Applied Mechnics (in print) A Hybird Membrane/Shell Method for Rapid Estimation of Springback in Anisotropic Sheet Metals F. Pourboghrat;K. Chung;O. Richmond
  4. the 7th International Symposium on Plasticity and Its Courrent Applications A 3D Hybird Membrane/Shell Method with Kinematic Hardening to Predict the Springback of Sheet Metals F. Pourboghrat. J.W. Yoon;K. Chung;F. Barlat
  5. Comp. Methods Appl. Mech. Eng. v.174 no.1;2 Elasto-plastic finite element method based on incremental deformation theory and continuum based shell element for planar anisotropic sheet materials J.W. Yoon;D.Y. Yang;K. Chung https://doi.org/10.1016/S0045-7825(98)00275-8
  6. Finite element procedures in engineering analysis K.J. Bathe
  7. Int. J. of Plasticity v.15 no.1 A general elasto-plastic finite element formulation based on incremental deformation theory for planar anisotropy and its application to sheet metal forming J.W. Yoon;D.Y. Yang;K. Chung;F. Barlat https://doi.org/10.1016/S0749-6419(98)00059-X
  8. Int. J. Mech .Sci. v.37 Finite Element Method for Sheet Forming Based on an Anisotropic Strain-Rate Potential and the Convected Coordinate system J.W. Yoon;I.S. Song;D.Y. Yang;K. Chung;F. Barlat https://doi.org/10.1016/0020-7403(95)00003-G
  9. Int. J. Mech. Sci. v.36 Rigid-Plastic Finite Element Analysis of Sheet Metal Forming Processes Using Continuous Contact Tretment and Membrane elements Incorporating Bending Effects D.J. Yoo; I.S. Song;D.Y. Yang;J.H Lee https://doi.org/10.1016/0020-7403(94)90030-2
  10. J. of Elasticity v.15 Deformation of C1/2 C-1/2 and More General Isotropic Tensor Function of C T.C. Ting https://doi.org/10.1007/BF00041428
  11. J. Mech. Phys. Solids v.34 External Paths of Plastic Work and Deformation R. Hill https://doi.org/10.1016/0022-5096(86)90015-3
  12. Int. J. Plasticity v.9 A Deformation Theory of Plasticity Based on Minimum Work Paths K. Chnung;O. Richmond https://doi.org/10.1016/0749-6419(93)90057-W
  13. Metallurical Transaction A v.24A Springback in Simple Axisymmetric Stampings R. Stevenson