Journal of the Korean Institute of Illuminating and Electrical Installation Engineers (조명전기설비학회논문지)

The Korean Institute of IIIuminating and Electrical Installation Engineers (한국조명전기설비학회)
권호 표지
DOI QR코드

DOI QR Code

The Development of 3 Dimensional Reflector Design Method for HID Lamps

HID 램프용 반사갓의 3차원 설계법 개발

  • 김진우 (강원대학교 전기공학과) ;
  • 박종환 (강원대 전기공학과) ;
  • 김진구 (강원대학교 대학원 전기공학과, 서울정수기능대학 전기과) ;
  • 김훈 (강원대 공대 전기전자정보통신공학부)
  • Published : 2003.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

Using pervious two-dimensional reflector design method, the three-dimensional reflector design method is developed for extrusion molding HID specular reflector optical design, Using this method, a HID reflector for tunnel was developed and estimated its performance.

기존의 2차원 설계법을 이용하여 3차원 압출성형 HID 경면 반사판형상 설계에 적용할 수 있는 3차원 설계법을 개발하였다. 이 설계법을 적용하여 터널용 HID 조명기구의 반사판 형상을 설계하고 그 성능을 예측하였다.

Keywords

References

  1. Jae-san Hwang, “Development of Specular Reflector Design Algorithm and Design Tool”, Thesis of Master Kangwon National Univ. Graduate School, 2001.
  2. Nam-keuk Hwang, “Development of Three Dimensional Specular Reflector Design Algorithm”, Thesis of Master Kangwon National Univ. Graduate School, 2002.
  3. William B Elmer, “The Optical Design of Reflectors”, TLA Lighting Consultants, Inc, Salem, Ma, 1989.
  4. Joseph B.Murdoch “Illumination Engineering From Edisom`s Lamp to the Laser”, Macmillan Publishing Company, 1985.