Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation on Material Properties of 3Cr-lMo-0.25V Steel by Electromagnetic Methods

전자기법을 이용한 3Cr-lMo-0.25V 강의 물성 평가

  • Published : 2003.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

It is advantageous to use NDE methods to assess the mechanical properties of materials since the conventional method is time-consuming and sometimes requires cutting of sample from the component. The NDE parameters such as ultrasonic velocity and attenuation, electric resistivity, and magnetic coercive force and remanance have been utilized to evaluate changes of material properties due to heat treatment condition. It has been found that changes of materials properties under quenched and tempered/PWHT treatments could not be detected using EMAT and Electrical resistivity methods. However, victors hardness and magnetic hysteresis loop decreased with heat treatment procedures. These results were obtained using 3Cr-lMo-0.25V steel. The magnetic parameters were found to be most sensitive to changes of material properties.

Keywords

References

  1. Ahn, B., Lee, S. S., Hong, S. T., Kim, H. C. and Kang, S. J., 1999, 'Application of the Acoustic Resonance Method to Evaluate the Grain Size of Low Carbon Steels,' NDT & E International, Vol. 32, pp. 85-89 https://doi.org/10.1016/S0963-8695(98)00032-2
  2. Hirao, M., Fukuoka, H., Fujisawa, K. and Murayama, R., 1989, 'Characterization of Formability in Cold-Rolled Steel Sheets Using Electromagnetic Acoustic Transducer,' Metall. Trans, Vol. 20, pp. 2385-2390 https://doi.org/10.1007/BF02666673
  3. Ahn, B. and Lee, S. S., 2000, 'Effect of Microstructure of Low Carbon Steels on Ultrasonic Attenuation,' IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, Vol. 47, pp. 620-629 https://doi.org/10.1109/58.842049
  4. Jeong, H., Nahm, S. H., Jhang, K. Y. and Nam, Y. H., 2001, 'Nonlinear Acoustic Effects and Material Strength Degradation due to High Temperature Exposure,' QNDE, Vol 20, pp. 1276-1282 https://doi.org/10.1063/1.1373901
  5. Jeong, H., Nahm, S. H., Jhang, K. Y. and Nam, Y. H., 2002, 'Evaluation of Fracture Toughness Degradation of CrMoV Rotor Steels Based on Ultrasonic Nonlinearity Measurements,' KSME International Journal, Vol. 16,pp. 147-154
  6. Lee, J. M., Nam, Y. H., Ahn, B., Nahm, S. H., Lee, S. S. and Lee, O.S., 2002, 'Evaluation of 1Cr-1Mo-0.25V Steel Degradation using Magnetic Barkhausen Noise,' KSME Journal, Vol. 26, pp. 1262-1269
  7. Ryu, K. S., Nahm, S. H., Kim, T. I., Yu, K. M. and Son, D., 1999, 'Toughness Degradation Evaluation of 1Cr-1Mo-0.25V Steel by Electrical Resistivity,' Journal of Material Science Letters, Vol. 18, pp. 1175-1176 https://doi.org/10.1023/A:1006686025193
  8. Ryu, K. S., Nahm, S. H., Kim, T. I., Yu, K. M. and Son, D., 2000, 'Dependence of Magnetic Properties on Isothermal Heat Treatment Timer for 1Cr-1Mo-0.25V Steel,' Journal of Magnetism and Magnetic Materials, Vol. 222, pp. 128-132 https://doi.org/10.1016/S0304-8853(00)00532-1
  9. Ryu, K. S., Nahm, S. H., Kim, T. I., Yu, K. M. and Son, D., 2001, 'Nondestructive Evaluation of Aged 1Cr-1Mo-0.25V Steel by Harmonic Analysis of Induced Voltage,' Journal of Magnetism and Magnetic Materials, Vol. 231, pp. 294-298 https://doi.org/10.1016/S0304-8853(01)00177-9
  10. Park Duck-Gun, 1998, 'A Study on the Irradiation Effect of Reactor Materials Using Micromagnetic Technique,' Ph. D. Thesis, KAIST, Taejon
  11. Cullity, B. D., 1972, Introduction to Magnetic Materials, Addison-wesley, pp. 287-356

Cited by

  1. Change in Ultrasonic Characteristics with Isothermal Heat Treatment of 2.25Cr-1Mo Steel vol.37, pp.3, 2013, https://doi.org/10.3795/KSME-A.2013.37.3.353