A Study on the Flexural Strength Capacity of Wall Stud Assembly

경량형강 스터드 벽체의 휨강도에 관한 연구

  • Received : 2002.12.11
  • Accepted : 2003.03.27
  • Published : 2003.04.27

Abstract

An investigation on the structural behavior of cold-formed steel lipped C-section stud for interior walls or partitions was carried out. This experimental research was carried out to study the ultimate and service load capacity of stud assemblies that are subjected to lateral loads. Each test specimen consisted of three or four lipped C-section studs and two C-section tracks that restrained both ends. The major factors considered in this experiment were the perforation on the web, the connection of the bridge channel and the special clip. The effect of the plaster board and the ply wood, which were attached to the tension flange on the flexural strength, was also investigated. Thereafter, the test strength capacities were compared with the nominal strength, based on the AISI Specifications (1996).

벽체용 박판냉간성형 Lip-C-형강의 구조적인 거동에 관한 연구의 일환으로 횡하중을 받는 스터드 벽체의 휨강도에 관한 실험적인 연구가 수행되었다. 시험체는 3개 또는 4개의 Lip-C-형강 스터드 부재의 양단을 C-형강 트랙으로 고정하여 제작되었다. 실험의 주요 변수는 스터드 복부의 천공 여부, 보강채널(bridge channel)의 간격 및 개수 그리고 보강 채널의 고정 및 스터드 플랜지의 간격 유지용 특수 클립(Clip)의 개수 등이며, 스터드의 인장측 플랜지에 부착된 합판과 석고보드의 벽에 강도에 미치는 영향이 연구되었다. 실험에 의한 휨강도는 AISI시방서(1996)에 근거한 강도와 비교하였다.

Keywords

References

  1. KS D 3609 건축용 강재 받침재(벽, 천장) 한국표준협회
  2. American Iron and Steel Inetitute Specifications for the Design of Cold-Formed Steel Structural members
  3. Australian Institute of Steel Construction Design of Cold-Formed Steel Structures. 2nd ed. Hancock, G.J.
  4. structural engineering design provisions v.2 Uniform Building code International Conference Building Officials
  5. Nippon Steel Technical Report no.79 Strength of Structural Elements for Steel-Framed Houses Koji Hanya;Ryoichi Kanno;Nobuyoshi Uno
  6. J. of Struc. Eng., ASCE Distortional Bucking of Thin-Walled Beams/Panels, Ⅰ Theory and Ⅱ Design Methos Serrette, R.L.;Pekoz, T.
  7. Proceedings of 16th International Specialty Conference on Cold-Formed Steel Structures A Study on the Flexural Strength Capacity of Wall Stud Assembly Song J. Y.;Kwon Y. B.;Chung H. S;Kim G. D.
  8. Thinwall User's Manual
  9. Cold-Formed Steel Design(2nd ed) Yu, Wei-Wen