DOI QR코드

DOI QR Code

Electrochemical Characteristics of Metal Coated Graphite for Anodic Active Material of Lithium Secondary Battery

금속 코팅된 흑연 입자로 제조된 전극의 전기화학적 특성

  • 최원창 (고려대학교 공과대학 재료공학과) ;
  • 이중기 (한국과학기술연구원 나노환경연구센타) ;
  • 변동진 (고려대학교 공과대학 재료공학과) ;
  • 조병원 (한국과학기술연구원 나노환경연구센타)
  • Published : 2003.05.01

Abstract

Various kinds of metals were coated on synthetic graphite in order to investigate the relationship between film characteristics and their electrochemical performance. Gas suspension spray coating method was employed for the coating of synthetic graphite. In our experimental range, all of the metal coated synthetic graphite showed the higher capacity than that of raw material at high C-rate mainly due to decrease in impedance of passivation film. In cyclic voltammetry experiments, silver-coated and tin-coated graphite anodes found the lithium-alloy reaction. Considering smaller amount of metal coating, the most increase in discharge capacity was caused by improvement of conductivity of the electrode. When single-component metal was coated, silver-coated graphite anode exhibited the highest discharge capacity and better cycleability. Double components of silver-nickel coated active material showed the highest discharge capacity, rate capability and the best cycle performance in the range of our experiments.

리튬이차전지 음극활물질로 사용되는 합성흑연입자에 여러종류금속을 코팅하여 그 전기화학적특성을 조사하였으며, 구체적인 코팅방법으로는 가스분산스프레이 코팅법을 적용하였다. 본 연구범위내에서 금속을 코팅한 입자로 제조된 전극은 충방전시 형성되는 계면저항을 감소시킴으로서 결과적으로 원시료에 비해서 높은 방전용량을 나타내었다. CV실험을 통해서 은과 주석은 리튬과의 합금반응을 확인할 수 있었으나, 2.5 중량$\%$ 이하의 낮은 코팅량을 고려했을 때, 높은 분산도를 지닌 금속 물질의 코팅을 통한 전극 활물질 표면의 균일한 전도도의 증가가 주요원인인 것으로 사료되었다. 단일계 금속으로 코팅하였을 경우 은코팅한 전극활물질이 가장 높은 방전용량과 사이클특성을 나타내었고, 은을 기본으로 하는 이성분계에서는 은-니켈전극이 가장 높은 고율특성을 나타내었다.

Keywords

References

  1. Fast ion transport in solids Armand M.B.;Van Gool W(ed.)
  2. J .Electrochem. Soc. v.126 no.349 Murphy D. W.;Carides JN. https://doi.org/10.1149/1.2129041
  3. J .Electrochem. Soc. v.127 no.773 Lazzari M;Scrosati B. https://doi.org/10.1149/1.2129753
  4. J .Electroche. Soc. v.134 no.638 Auborn J. J.;Barberio Y. L. https://doi.org/10.1149/1.2100521
  5. Carbon v.165 no.37 S. Flandrois;B. Simon
  6. J. Electrochem. Soc. v.140 no.315-20 Imanishi N.;Kashiwagi H;Ichikawa T.;Takeda Y.;Yamamoto O.;Inagaki M. https://doi.org/10.1149/1.2221044
  7. Chemistry and physics of carbon v.22 no.1 Oberlin A.;Thrower P.A(ed.)
  8. J. Elcetrochem. Soc v.137 no.2009 Fong R.;Von Sacken U.;Dahn J. R. https://doi.org/10.1149/1.2086855
  9. J. Electrochem. Soc. v.140 no.2490 Ohzuku T.;Iwakoshi Y.;Sawai K. https://doi.org/10.1149/1.2220849
  10. J. Power Sources v.68 no.208 H. Momose;H. Honbo;S. Takeuchi;K. Nishimura;T. Horiba;Y. Muranaka;Y. kozono;H. Miyadera https://doi.org/10.1016/S0378-7753(96)02627-4
  11. J. Power Sources v.96 no.277 J. Read;D. Foster;J. Wolfenstine;W. Behl https://doi.org/10.1016/S0378-7753(00)00569-3
  12. J. Power Sources v.81 no.383 K. D. Kepler;J. T. Vaughey;M. M. Thackeray https://doi.org/10.1016/S0378-7753(99)00111-1
  13. J. Power Sources v.1023 no.60 L. Shi;Q. Wang;h. Li;Z. Wang;X. Huang;L. Chen https://doi.org/10.1016/S0378-7753(01)00773-X

Cited by

  1. Electrochemical Characteristics of the Silicon Thin Films on Copper Foil Prepared by PECVD for the Negative Electrodes for Lithium ion Rechargeable Battery vol.7, pp.4, 2004, https://doi.org/10.5229/JKES.2004.7.4.173