IE interfaces (산업공학)

Korean Institute of Industrial Engineers (대한산업공학회)
권호 표지

A Study on the Product Liability for Product Safety

제품안전을 위한 제조물책임(PL)에 관한 연구

  • Kwon, Young-Guk (Department of Industrial Engineering, Kwandong University)
  • 권영국 (관동대학교 산업공학과)
  • Received : 20020500
  • Accepted : 20020500
  • Published : 2002.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

In July 2002, law of product liability will be established in Korea. Therefore, prevention for product liability(PL) will be immediately needed for many companies. So, in this paper, following topics will be discussed: 1) what are product liability and product safety, 2) why they are needed, 3) why important, 4) what's the difference between considering PL and not considering PL for companies, 5 ) what are risk management methods and risk evaluation system, 6) what is SASA(Systematic Approach to Accident Scenario Analysis) method for applying PL, 7) providing a final conclusion and discussion for future PL law.

Keywords

References

  1. Bae,Y.I. (2002), Preparation of Enterprise and Adaptation of Product Liability, CEO Information, 342, April 3, http://www.seri.org.
  2. Byun,S.N. and Lee, D. H. (2000), Policy and Preparation for Product Liability And Product Safety, Korean journal of Industrial Engineering, 26(3),265-282
  3. Byun, S. N. and Lee, D. H. (1998), Policy for Quality Management and ISO 9000byestablishing Product Liability, Korean journal of Quality Management, 26(1)
  4. Choi, S.Y. and Kim,S.C. (2000), Analysis of dassification in Product Liability, Korean journal of Safety Management & Science, 2(3)
  5. Department of Defence (DOD, 2000), MIL-STD-882D, Standard Practice for System Safety, Defence Standardization Program Office, Virginia, USA.
  6. Gal,W. M.andLee, Y. J.(1999), Product Liability & Product Safety Prevention by Risk Evaluation of Product, Korean journal of Industrial Safety, 14(2)
  7. Go,M.J.(2000), Study for Introducing Product Liability, Master Thesis, Graduate School of Pusan National University, Pusan, Korea
  8. Greenberg, H.R.and Cramer, J.J.(1991), Risk Assessment and Risk management for the Chemical Process Industry, NY: Van Nostrand Reinhold, USA.
  9. Institute of Technology Encouragement (1986), Regulation for Product Safety and Product liability, Department of Quality Control in Institute of Technology Encouragement, 97
  10. lung, K. T. (2002), Direction of Design for User Interface in Product Safety, CD Proceeding of Spring Korean Ergonomics Society
  11. Kang, S. K. and Kang, I. H. (2002), Safety Evaluation for Domestic Electronics-Evaluation Case of Medium Size Companies, CD Proceeding of Spring Korean Ergonomics Society
  12. Kanis, H. and Weegels, M.F. (1990), Research into Accidents as a Design Tool, Ergonomics, 33,439-445
  13. Kim,J. Y. (2002), A Study on the Product Liability for Consumer Safety, Master Thesis, Graduate School of Kwandong University, Yang Yang, Korea
  14. Kim,Y. C.andLee, C.M.(2002), Study of Product Liability for Children, CD Proceeding of Spring Korean Ergonomics Society
  15. Kwon, Y. G. (2000), Industrial Safety Engineering, Hyung Sul Publisher, Seoul, Korea, 647-684
  16. Kwon, Y. G. and Kim,J. Y. (2000), An Adoption of Product Liability for a Systematic Approach to Accident Scenario Analysis, Korean journal of Safety Management & Science, 3(4), 19-34
  17. Lee, D. H. (2000), A Systematic Approach to Accident Scenario Analysis for Designing Safer Products: Child Nursery Equipment Case Studies, Ph.D.Thesis, Graduate School of KyungHee University, Seoul, Korea
  18. Lee, D.H. and Byun, S.N. (2000), A Systematic Approach to Accident Scenario Analysis of Child Nursery Equipment: Stroller Case Study, Proceedings of Human Factors and Ergonomics Society 44th Annual Meeting, San Diego, CA, USA.
  19. Lee, D. H., Na, Y. G. and Kim,M. S.(2002), Case Studies for Management Program of Product Safety in Risk Management, CD Proceeding of Spring Korean Ergonomics Society
  20. Lee, Y. H. (2002), System and Principles in Risk Evaluation for Product Safety, CD Proceeding of Spring Korean Ergonomics Society
  21. Lim, H.G. and Go,B.I.(2002), Method of Preparation of Product Manual to prepare Product Liability-Focus on Usage of standard specification, CD Proceeding of Spring Korean Ergonomics Society
  22. Peter Asch (1988), Consumer Safety Regulation, Oxford Univ. Press, 133,Oxford, England
  23. Warne,C. A. (1982), Designing out Accidents-first Understand the Problem, Applied Ergonomics, 13, 2-6
  24. http://www.kpic.or.kr
  25. http://www.plfree.co.kr