IE interfaces (산업공학)

Korean Institute of Industrial Engineers (대한산업공학회)
권호 표지

Product Liability Prevention Policies through the Improvement of Product Safety and Reliability

제품안전 및 신뢰성 향상을 통한 제조물책임 예방대책

  • 김진규 (주성대학 산업시스템경영공학과)
  • Received : 20020000
  • Accepted : 20020600
  • Published : 2002.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Product Liability(PL) is a legal policy to deal with global competition by improving domestic industrial competitive power and to reduce the cost of defect products. The purpose of this paper is to address the state of the art solutions to dispute on PL, in reality of a frequent occurrence of global product exchange focussing on product safety that is one of the most important functions of PL and to improve solution of the product safety and reliability responsive to PL. To minimize PL exposure, manufacturers should reflect comprehensive product safety and reliability concepts in establishing PL prevention policies. Total PL prevention policies are composed of total quality management and product safety management system in respect of safety design, risk, and reliability. These PL prevention activities should be performed consistently during the total product life cycle, especially product research and development periods.

Keywords

References

  1. Bang, O-K.(2003), Safety Management Policy, KSQM, QA/PL Workshop, 26-39
  2. Byun, S-N.and Lee, D-H,(2000), Product Liability and a Product Safety Policy, Journal of the Korean Institute for Industrial Engineer, 26(3), 265-282
  3. Byun, S-N. and Lee, D-H.(1997), Product Liability Prevension with a implementation of ISO 9000 Services, Spring Conference of KSQM, 185-195
  4. Consumer Protection Board(CPB 2001), PL Establishment and Content
  5. CPB(2002), http://www.cpb.or.kr
  6. CPB(2002), http://safe.cpb.or.kr
  7. CPSC(2002), http://www.cpsc.gov
  8. CS Management Center(2001),Reliability Analysis Technique Couse Text, Samsung Electronics Co.Ltd.
  9. Done, B.(1996), Product liability-Who cares? Quality World: for the quality professional, 22(11), 794-796
  10. Dong-A Ilbo(2002), Product Liability of Emergency Take off Incident, Jan. 26
  11. Goodden, R.(1996), A new frontier for quality: Product liability prevention, Quality World: for the quality professional, 22(11),800-805
  12. Ha,J-S.(2002), http://www.pllawyer.co.kr
  13. Ha,J-S. and Choi, B-L.(1997), PL and Defence for Enterprisess, The Korea Economic Daily
  14. Hayashida,K(1996),The product liability law of Japan, ZLW, 45(2),162-165
  15. Hobbs, G. K (2000), Accelerated &Liability Engineering: HALT and HASS, John Wiley & Sons Ltd.,New York
  16. Hong,H-K(2000),A Study of PL Prevention System in the Leading Enterprises, Journal of KIKIS, 1(1), 153-162
  17. Hong,H-K.and ParkS-C(1999),A Study of PL Prevention System in the USA And Japanese Leading Enterprises, journal of KSQM, 27(3),189-201
  18. Inter-Risk Co.Ltd.(2001), PL Defence Manual, KMAC
  19. ISO9004: 2000,KSA9004: 2001Quality Management System-Guidelines for performance improvement
  20. Jang, J-S. and An, D-G.(1997),How to Perform FMEA Effectively, Journal of KSQM, 25(1),156-172
  21. Jung, W.(2002), Risk Analysis Techniques for Product Safety, QuIaiity Management, 4, 98-105
  22. KaI, W-M.(1998), A Study on the Model to Prevent and Defend Product Liability for consumer Safety, Ph.D. Thesis, Graduate School of Ajou University, Suwon, Korea
  23. Kang, I-S. and Kim, j-K.(1998), Reliability Engineering, Hanal Publishing Co. Lrd.,Seoul, Korea
  24. KATS( 2002), QCAS, http://www.ats.go.kr
  25. KFSB(2002), http://www.plkorea.com
  26. Kim,J-K(2001), Product Liability and Defence System, ie magazine, 8(1), 46-51
  27. Korean Agency for Technology and Standards(KATS 2001), Reliability Analysis And Test Course Text
  28. Korean Electronics Technology Institute(KETI 2001),Field & Liability Professional Couse Text
  29. Korean Standards Association(KSA 2002), PL Enforce and Defence, Quality Management, 3, 21-50
  30. KPL(2002), http://www.kplc.or.kr
  31. Lee, H-J.(2001),PL Defence for our Enterprises, KSQM, QA/PL Workshop, 40-49
  32. Ministry of Commerce, Industry and Energy(MOE 2001), Pill Policies in July. 1. 2002
  33. Modarres, M.,Karninskiy, M and Krivtsov, V.(1999), Reliability Engineering and Risk Analysis, Marcel Dekker, Inc.,New York
  34. Moon, S-T.(2001), A Review of Product Liability and Defence of our Enterprises, conference of KORAS, 199-211
  35. Oh,C-S.(1995), PL Law; Chung Rim Publishing Co.Ltd.,Seoul, Korea
  36. Park,Y-S.(2001),A Study on the Product Liability Policy, Conference of KORAS, 173-197
  37. PL Korea(2002), http://www.plfree.co.kr
  38. Rim, Y-J.(2001), Product Liability Defence Manual, KPLC
  39. Robert, M.(1997), Risk watch: The latest development in product safety and liability, OS&H, 27(1), 32-35
  40. Ryan, K. E. (1996), Product liability: An overview of critical loss control factors, Professional Safety, 41(4), 33-34
  41. Small and Medium Business Administration(SMBA 2002),PL Guide for Small Business
  42. Small Business Corporation, Training Institute(2002), PL Professional Course Text-PLP Defence
  43. 5MBA(2002), http://www.smba.go.kr
  44. Villacourt, M. and Govil, P. (1994), Failure Reporting, Analysis, and Corrective Action System" SEMATECH
  45. Weinstein, A.S.(1997), Reducing risk in product liability, Machine Design, 69(9), 95-98