참고문헌
- Riedel, H., 1987, 'Fracture at High Temperature,' Springer-Verlag
- Yoon, K. B., Saxena, A. and McDowell, D. L., 1992, 'Influence of Crack Tip Cyclic Plasticity on Creep-Fatigue Crack Growth,' ASTM STP 1131, pp. 367 - 392
- Yoon, K. B., Saxena, A. and Liaw, P. K., 1993, 'Characterization of Creep-Fatigue Crack Growth Behavior under Trapezoidal Waveshape using Ct-Parameter,' International Journal of Fracture Vol.59, pp. 95 - 114 https://doi.org/10.1007/BF00012385
- Adefris, N., 1993, 'Creep-Fatigue Crack Growth Behavior of 1Cr-1Mo-1/4V Rotor Steel,' Ph. D. Thesis, School of Materials Science and engineering, Georgia Institute of Technology, Atlanta, GA
- Yoon, K. B. and Lee, J. S., 2000, 'Evaluation of Ct-parameter for Weld Interface Crack Considering Material Plastic Behavior,' Transaction of the KSME, Vol. 24, No.3, pp. 676-684
- Yoon, K. B., Kim, K. W. and Baek, U. B., 1998, 'Modeling of Creep Crack Growth Behavior of Low-Alloy Steel Weld,' Transaction of the KSME, Vol. 22, No. 12, pp. 2153 - 2162
- Grover, P. S., 1996, 'Creep-Fatigue Crack Growth in Cr-Mo-V Base Material and Weldments,' Ph. D. Thesis, School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA
- Johnson. H. H., 1965, 'Calibrating the Electrical Potential Method for Studying Slow Crack Growth,' Material Research and Standard, Vol. 5, No.9, pp. 442-445
- Saxena, A., 1980, 'Electrical Potential Technique For Monitoring Subcritical Crack Growth at Elevated Temperature,' Eng. Fracture Mechanics, Vol. 13, No.4, pp. 741-750 https://doi.org/10.1016/0013-7944(80)90005-3
- Baek, U. B., Nahm, S. H., Suh, C. M. and Yoon, K. B., 1994, 'A Study on initial Transient Behavior in Creep-Fatigue Crack Growth,' Transaction of the KSME, Vol. 18, No.7, pp. 1722-1729
- Baek, U. B., Yoon, K. B., Lee, H. M. and Suh, C. M., 2000, 'Creep-Fatigue Crack Growth at CrMo Steel Weld Interface,' Transaction of the KSME A, Vol. 24, No. 12, pp. 3088-3095
- Baek, U. B., Yoon, K. B., Suh, C. M. and Lee, H. M., 2000, 'An Experimental Study on High Temperature Material Properties of Welded Joint,' Transaction of the KSME A, Vol. 24, No. 11, pp. 3096-3101
- Yoon, K. B., Baek, U. B. and Suh, C. M., 1997, 'Effects of Loading Rate on Creep Crack Growth During the Succeeding Load-Hold Period under Trapezoidal Fatigue Waveshapes,' Elevated Temperature Effects on Fatigue and Fracture, ASTM STP 1297, pp. 102-116
- Ma, Y. W., Baek, U. B. and Yoon, K. B., 2001, 'Introduction of Creep-Reversal Parameter for Improving Fatigue Crack Growth Life Assessment Model at High Temperature,' Proc. 2nd Conf. for Mat. & Fract. in 2001. KSME, pp. 265-271
- Baek, S. G., Song, G. W. and Hyun, J. S., 1998, 'Low Cycle Creep-Fatigue Life Prediction 1Cr-0.5Mo Pipe Steel with Hold Time Effects by Using the Plastic Strain Energy,' Transaction of the KSME A, Vol. 22, No. 12, pp. 2093-2099