DOI QR코드

DOI QR Code

Adaptive p-finite element method for wind engineering

  • Selvam, R. Panneer (Computational Mechanics Laboratory, Department of Civil Engineering BELL 4190, University of Arkansas) ;
  • Qu, Zu-Qing (Computational Mechanics Laboratory, Department of Civil Engineering BELL 4190, University of Arkansas)
  • 발행 : 2002.04.25

초록

An important goal of computational wind engineering is to impact the design process with simulations of flow around buildings and bridges. One challenging aspect of this goal is to solve the Navier-Stokes (NS) equations accurately. For the unsteady computations, an adaptive finite element technique may reduce the computer time and storage. The preliminary application of a p-version as well as an h-version adaptive technique to computational wind engineering has been reported in previous paper. The details on the implementation of p-adaptive technique will be discussed in this paper. In this technique, two posteriori error estimations, which are based on the velocity and vorticity, are first presented. Then, the polynomial order of the interpolation function is increased continuously element by element until the estimated error is less than the accepted. The second through sixth orders of hierarchical functions are used as the interpolation polynomials. Unequal order interpolations are used for velocity and pressure. Using the flow around a circular cylinder with Reynolds number of 1000 the two error estimators are compared. The result show that the estimated error based on the velocity is lower than that based on the vorticity.

키워드

참고문헌

  1. Babuska, I., Strouboulis, T., Upadhyay, C.S., Gangaraj, S.K. and Copps, K. (1994), "Validation of a posteriori error estimators by numerical approach", Int. J. Numer. Meth. Eng., 37, 1073-1123. https://doi.org/10.1002/nme.1620370702
  2. Brooks, A.N. and Hughes, T. J. R. (1982), "Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations", Comput. Meth. Appl. Mech. Eng., 32, 199-259. https://doi.org/10.1016/0045-7825(82)90071-8
  3. Choi, C.K. and Yu, W.J. (1998), "Adaptive finite element wind analysis with mesh refinement and recovery", Wind and Structures, 1, 111-125. https://doi.org/10.12989/was.1998.1.1.111
  4. Choi, C.K. and Yu, W.J. (1999), "Adaptive refinement/recovery for analysis of wind around structure", J. Aerospace Eng., 12, 168-175. https://doi.org/10.1061/(ASCE)0893-1321(1999)12:4(168)
  5. Li, L.-Y. (1997), "Adaptive finite element methods: a review", Applied Mechanics Reviews, 50, 581-591. https://doi.org/10.1115/1.3101670
  6. Peano, A., Pasini, A., Riccioni, R. and Sardella, L. (1979), "Adaptive approximations in finite element structural analysis", Computers and Structures, 10, 333-342. https://doi.org/10.1016/0045-7949(79)90102-0
  7. Oden, J.T., Demkowicz, L., Rachowicz, W. and Hardy, O. (1989), "Toward a universal h-p adaptive finite element stategy, Part 1. Constrained approximation and data structure", Comput. Meth. Appl. Mech. Eng., 77, 79-112. https://doi.org/10.1016/0045-7825(89)90129-1
  8. Selvam, R.P. (1997), "Finite element modeling of flow around a circular cylinder using LES", J. Wind Eng. Ind. Aerod., 67-68, 129-139. https://doi.org/10.1016/S0167-6105(97)00068-8
  9. Selvam, R.P. (1998), "Computational procedures in grid based computational bridge", in A. Larsen & S. Esdahl (eds), Bridge Aerodyanmics, A.A. Balkema, Rotterdam, 327-336.
  10. Selvam, R.P. and Bosch, H. (1999), "Finite element modelling of flow around bridges", in A. Larsen , G.L. Larose & F.M. Livesey (eds), Wind Engineering into the 21st Century, A.A. Balkema, Rotterdam, 2, 1321- 1327.
  11. Selvam, R.P. (2000), "Computation of flow over circular cylinder using p-adaptive FEM", Int. Symp. on Wind and Structures for the 21st Century, Chejudo, Korea, January 26-28.
  12. Szabo, B. and Babuska, I. (1990), Finite Element Analysis, Wiley, New York.
  13. Tamura, T., Ohta, I. and Kuwahara, K. (1990), "On the reliablility of two-dimensional simulation for unsteady flows around a cylinder-type structure", J. Wind Eng. Ind. Aerod., 35, 275-298. https://doi.org/10.1016/0167-6105(90)90221-W
  14. Zienkiewicz, O.C., Gago, J.P.S. and Kelly, D.W. (1983), "The hierarchical concept in finite element analysis", Computers & Structures, 16, 53-65. https://doi.org/10.1016/0045-7949(83)90147-5
  15. Zienkiewicz, O.C. and Taylor, R. L. (1989), The Finite Element Method, 1, McGraw-Hill Book Company, England.

피인용 문헌

  1. Computer modeling of tornado forces on buildings vol.6, pp.3, 2003, https://doi.org/10.12989/was.2003.6.3.209
  2. Combination of adaptive grid-embedding and equation adaptation methods for compressible viscous flows vol.26, pp.8, 2008, https://doi.org/10.1002/cnm.1199