Structural Engineering and Mechanics

  • 제14권6호
  • /
  • Pages.699-712
  • /
  • 2002
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A new quadrilateral 5-node non-conforming membrane element with drilling DOF

  • Lee, Tae-Yeol (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology) ;
  • Choi, Chang-Koon (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology)
  • 투고 : 2002.03.16
  • 심사 : 2002.11.01
  • 발행 : 2002.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, a new quadrilateral 5-node non-conforming membrane element with drilling degrees of freedom is presented. The main advantage of these elements is the relatively small number of integration points to evaluate a stiffness matrix comparing to the existing transition membrane elements (CLM elements). Moreover, the presented elements pass the patch test by virtue of the Direct Modification Method incorporated into the element formulation. The presented 5-node elements are proved to be very efficient when used in the local mesh refinement for the in-plane structures which have stress concentrations. And some numerical studies also show the good performance of the new element developed in this study.

키워드

참고문헌

  1. Bathe, K.J. (1982), Finite Element Procedures in Engineering Analysis, Prentice-Hall, New Jersey.
  2. Bergan, P.G. and Felippa, C.A. (1985), "A triangular membrane element with rotational degrees of freedom",Comp. Meth. Appl. Mech. Eng., 50, 25-69. https://doi.org/10.1016/0045-7825(85)90113-6
  3. Choi, C.K., Chung, K.Y. and Lee, T.Y. (2001), "A direct modification method for strains due to non-conformingmodes", Struct. Eng. Mech., 11(3), 325-340. https://doi.org/10.12989/sem.2001.11.3.325
  4. Choi, C.K., Lee, T.Y. and Chung, K.Y. (2002), "Direct modification for non-conforming elements with drillingDOF", Int. J. Numer. Methods. Eng., 55, 1463-1476. https://doi.org/10.1002/nme.550
  5. Choi, C.K. and Lee. W.H. (1995), "Transition membrane elements with drilling freedom for local meshrefinements", Struct. Eng. Mech., 3(1), 75-89. https://doi.org/10.12989/sem.1995.3.1.075
  6. Choi, C.K. and Park, Y.M. (1989), "Nonconforming transition plate bending elements with variable midsidenodes", Comput. Struct., 32, 295-304. https://doi.org/10.1016/0045-7949(89)90041-2
  7. Choi, C.K. and Park, Y.M. (1992), "Transition plate bending elements for compatible mesh gradation", J. Eng.Mech. ASCE, 118(2), 462-480. https://doi.org/10.1061/(ASCE)0733-9399(1992)118:3(462)
  8. Choi, C.K. and Park, Y.M. (1997), "Conforming and nonconforming transition plate bending elements for anadaptive h-refinement", Thin Wall. Struct., 28, 1-20. https://doi.org/10.1016/S0263-8231(97)00007-4
  9. Evans, A., Marchant, M.J., Szmelter, J. and Weatherill, N.P. (1991), "Adaptivity for compressible flowcomputations using point embedding on 2-D structured multiblock meshes", Int. J. Numer. Methods. Eng., 32,895-919. https://doi.org/10.1002/nme.1620320413
  10. Groenwold, A.A. and Stander, N. (1995), "An efficient 4-node 24 d.o.f. thick shell finite element with 5-pointquadrature", Engineering Computations, 12, 723-747. https://doi.org/10.1108/02644409510104686
  11. Gupta, A.K. (1978), "A finite element for transition from a fine to a coarse grid", Int. J. Numer. Methods. Eng.,12, 35-45. https://doi.org/10.1002/nme.1620120104
  12. Hughes, T.J.R. (1987), The Finite Element Method-Linear static and dynamic finite element analysis, Prentice-Hall, New Jersey.
  13. Hughes, J.R. and Brezzi, F. (1989), "On drilling degrees of freedom", Comp. Methods Appl. Mech. Eng., 72,105-121. https://doi.org/10.1016/0045-7825(89)90124-2
  14. Stander, N. and Wilson, E.L. (1989), "A 4-node quadrilateral membrane element with in-plane vertex rotationsand modified reduced quadrature", 6, 266-271. https://doi.org/10.1108/eb023781
  15. Timoshenko, S. and Goodier, J.N. (1951), Theory of Elasticity, McGraw-Hill, New York.
  16. Wilson, E.L. and Ibrahimbegovic, A. (1990), "Use of incompatible displacement modes for the calculation ofelement stiffnesses or stresses", Finite Elements in Analysis and Design, 31, 229-241.
  17. Yunus, S.M., Pawlak, T.P. and Wheeler, M.J. (1990), "Application of the Zienkiewicz-Zhu error estimator forplate and shell analysis", Int. J. Numer. Methods. Eng., 29, 1281-1298. https://doi.org/10.1002/nme.1620290612
  18. Zhu, J.Z., Zienkiewicz, O.C. and Wu, J. (1991), "A new approach to the development of automatic quadrilateralmesh generation", Int. J. Numer. Methods. Eng., 32, 849-866. https://doi.org/10.1002/nme.1620320411
  19. Zienkiewicz, O.C., Taylor, R.L. and Too, J.M. (1971), "Reduced integration technique in general analysis ofplates and shells", Int. J. Numer. Methods. Eng., 3, 275-290. https://doi.org/10.1002/nme.1620030211

피인용 문헌

  1. Variable-node non-conforming membrane elements vol.16, pp.4, 2003, https://doi.org/10.12989/sem.2003.16.4.479
  2. Efficient remedy for membrane locking of 4-node flat shell elements by non-conforming modes vol.192, pp.16-18, 2003, https://doi.org/10.1016/S0045-7825(03)00203-2