DOI QR코드

DOI QR Code

Non-conforming modes for improvement of finite element performance

  • Choi, Chang-Koon (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology) ;
  • Lee, Tae-Yeol (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology)
  • Received : 2002.05.30
  • Accepted : 2002.09.27
  • Published : 2002.11.25

Abstract

This paper presents an efficiency of various non-conforming (NC) modes in development of a series of new finite elements with the special emphasis on 4-node quadrilateral elements. The NC modes have been used as a key scheme to improve the behaviors of various types of new finite elements, i.e., Mindlin plate bending elements, membrane elements with drilling degrees of freedom, flat shell elements. The NC modes are classified into three groups according to the 'correction constants' of 'Direct Modification Method'. The first group is 'basic NC modes', which have been widely used by a number of researchers in the finite element communities. The basic NC modes are effective to improve the behaviors of regular shaped elements. The second group is 'hierarchical NC modes' which improve the behaviors of distorted elements effectively. The last group is 'higher order NC modes' which improve the behaviors of plate-bending elements. When the basic NC modes are combined with hierarchical or higher order NC modes, the elements become insensitive to mesh distortions. When the membrane component of a flat shell has 'hierarchical NC modes', the membrane locking can be suppressed. A number of numerical tests are carried out to show the positive effect of aforementioned various NC modes incorporated into various types of finite elements.

Keywords

References

  1. Allman, D.J. (1988), "A quadrilateral finite element including vertex rotations for plane elasticity analysis", Int. J. Num. Meth. Eng., 26, 717-739. https://doi.org/10.1002/nme.1620260314
  2. Bathe, K.-J. and Dvorkin, E.N. (1985), "A four node plate bending element based on Mindlin-Reissner plate theory and a mixed interpolation", Int. J. Num. Meth. Eng., 21, 367-383. https://doi.org/10.1002/nme.1620210213
  3. Choi, C.K., Chung, K.Y. and Lee, T.Y. (2001), "A direct modification method for strains due to non-conforming modes", Structural Engineering and Mechanics, 11(3), 325-340. https://doi.org/10.12989/sem.2001.11.3.325
  4. Choi, C.K. and Kim, S.H. (1989), "Coupled use of reduced integration and non-conforming modes in quadratic Mindlin plate element", Int. J. Num. Meth. Eng., 28, 1909-1928. https://doi.org/10.1002/nme.1620280814
  5. Choi, C.K., Lee, P.S. and Park, Y.M. (1999a), "Defect-free 4-node flat shell element: NMS-4F element", Structural Engineering and Mechanics, 8, 207-231. https://doi.org/10.12989/sem.1999.8.2.207
  6. Choi, C.K. and Lee, T.Y. (2002a), "Directly modified non-conforming modes for 4-node Mindlin plate-bending elements", J. Eng. Mech. ASCE, submitted.
  7. Choi, C.K. and Lee, T.Y. (2002b), "Development of defect-free non-conforming flat shell element", Proc. the Fifth World Congress on Computational Mechanics (WCCM V), July 7-12, Austria, Vienna.
  8. Choi, C.K. and Lee, T.Y. (2002c), "Efficient remedy for membrane locking of flat shell elements by nonconforming modes", Comput. Meth. Appl. Mech. Eng., submitted.
  9. Choi, C.K., Lee, T.Y. and Chung, K.Y. (2002d), "Direct modification for non-conforming elements with drilling DOF", Int. J. Num. Meth. Eng., 55, 1463-1476. https://doi.org/10.1002/nme.550
  10. Choi, C.K. and Park, Y.M. (1999b), "Quadratic NMS Mindlin-plate-bending element", Int. J. Num. Meth. Eng., 46, 1273-1289. https://doi.org/10.1002/(SICI)1097-0207(19991120)46:8<1273::AID-NME754>3.0.CO;2-N
  11. Choi, C.K. and Schnobrich, W.C. (1975), "Nonconforming finite element analysis of shells", J. Eng. Mech. Div., ASCE, 101, 447-464.
  12. Frey, F. (1989), "Shell finite elements with six degrees of freedom per node", Analytical and Computational Models of Shells, CED-Vol. 3, ASME, New York.
  13. Groenwold, A.A. and Stander, N. (1995), "An efficient 4-node 24 D.O.F. thick shell finite element with 5-point quadrature", Engineering Computations, 12, 723-747. https://doi.org/10.1108/02644409510104686
  14. Ibrahimbegovic, A. (1992), "Plate quadrilateral finite element with incompatible modes", Commun. Appl. Num. Methods, 8, 497-504. https://doi.org/10.1002/cnm.1630080803
  15. Ibrahimbegovic, A., Taylor, R.L. and Wilson, E.L. (1990), "A robust quadrilateral membrane element with rotational degrees of freedom", Int. J. Num. Meth. Eng., 30, 445-457. https://doi.org/10.1002/nme.1620300305
  16. Irons, B.M. (1966), "Engineering applications of numerical integration in stiffness methods", AIAA J., 4, 2035- 2037. https://doi.org/10.2514/3.3836
  17. Kim, S.H. and Choi, C.K. (1992), "Improvement of quadratic finite element for Mindlin plate bending", Int. J. Num. Meth. Eng., 34, 197-208. https://doi.org/10.1002/nme.1620340112
  18. Lee, T.Y. (2002), "Development of flat shell elements with directly modified non-conforming modes and analysis of shell structures", Ph. D. dissertation, Korea Advanced Institute of Science and Technology, Daejeon, Korea.
  19. Lesaint, P. (1976), "On the convergence of Wilson's non-conforming element for solving the elastic problem", Comput. Meth. Appl. Mech. Eng., 7, 1-16. https://doi.org/10.1016/0045-7825(76)90002-5
  20. MacNeal, R.H. and Harder, R.L. (1985), "A proposed standard set of problems to test finite element accuracy", Finite Elem. Anal. Des., 1, 3-20. https://doi.org/10.1016/0168-874X(85)90003-4
  21. MacNeal, R.H. and Harder, R.L. (1988), "A refined four-node membrane element with rotational degrees of freedom", Computers and Structures, 28, 75-84. https://doi.org/10.1016/0045-7949(88)90094-6
  22. Sabir, A.B. (1985), "A rectangular and a triangular plane elasticity element with drilling degree of freedom", Proceedings of the Second International Conference on Variational Methods in Engineering, Brebbia, C.A. (ed.), July 1985, Springer-Verlag, Berlin, 17-55.
  23. Simo, J.C., Fox, D.D. and Rifai, M.S. (1989), "On a stress resultant geometrically exact shell model Part II : The linear theory ; computational aspects", Comput. Meth. Appl. Mech. Eng., 53, 53-92.
  24. Taylor, R.L. (1987), "Finite element analysis of linear shell problem" in Whiteman, J.R.(ed.), Proc. of the Mathematics of Finite Elements and Application VI, Academic Press, New York, 191-203.
  25. Taylor, R.L., Beresford, P.J. and Wilson, E.L. (1976), "A nonconforming element for stress analysis", Int. J. Num. Meth. Eng., 10, 1211-1219. https://doi.org/10.1002/nme.1620100602
  26. Timoshenko, S. and Goodier, J.N. (1951), Theory of Elasticity, McGraw-Hill, New York.
  27. Timoshenko, S. and Woinowsky-Krieger, S. (1959), Theory of Plates and Shells, McGraw-Hill.
  28. Wilson, E.L. and Ibrahimbegovic, A. (1990), "Use of incompatible displacement modes for the calculation of element stiffnesses or stresses", Finite Elem. Anal. Des., 31, 229-241.
  29. Wilson, E.L., Taylor, R.L., Doherty, W.P. and Ghaboussi, J. (1973), "Incompatible displacement models", in Numerical and Computer Methods in Structural Mechanics, eds. S.J. Fenves, N. Perrone, A. R. Robinson, and W. C. Schnobrich, Academic Press, New York, 43-57.

Cited by

  1. Variable-node non-conforming membrane elements vol.16, pp.4, 2003, https://doi.org/10.12989/sem.2003.16.4.479
  2. Efficient remedy for membrane locking of 4-node flat shell elements by non-conforming modes vol.192, pp.16-18, 2003, https://doi.org/10.1016/S0045-7825(03)00203-2