DOI QR코드

DOI QR Code

General stress-strain model for concrete or masonry response under uniaxial cyclic compression

  • La Mendola, Lidia (Dipartimento di Ingegneria Strutturale e Geotecnica, Universita di Palermo) ;
  • Papia, Maurizio (Dipartimento di Ingegneria Strutturale e Geotecnica, Universita di Palermo)
  • 투고 : 2002.04.30
  • 심사 : 2002.08.13
  • 발행 : 2002.10.25

초록

The paper proposes analytical forms able to represent with very good approximation the constitutive law experimentally deducible by means of uniaxial cyclic compressive tests on material having softening post-peak behaviour in compression and negligible tensile strength. The envelope, unloading and reloading curves characterizing the proposed model adequately approach structural responses corresponding to different levels of nonlinearity and ductility, requiring a not very high number of parameters to be calibrated experimentally. The reliability of the model is shown by comparing the results that it is able to provide with the ones analytically deduced from two reference models (one for concrete, another for masonry) available in the literature, and with experimental results obtained by the authors in the framework of a research in progress.

키워드

참고문헌

  1. Abrams, D., Noland, J. and Atkinson, R. (1985), "Response of clay unit masonry to repeated compressive forces", Proc. 7th International Brick Masonry Conference, Melbourne.
  2. Ahmad, S.M. and Shah, S.P. (1985), "Behavior of hoop confined concrete under high strain rates", ACI J., 82 (5), 195-211.
  3. Ali, M.A. and White, R.N. (1997), "On extending ACI 318 to high strength concrete", Proc. First International Conference, "High Strength Concrete", Kona, Hawaii.
  4. AlShebani, M.M. and Sinha, S.N. (1999), "Stress-strain characteristics of brick masonry under uniaxial cyclic loading", J. Struct. Div., ASCE, 125(6), 600-604. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:6(600)
  5. AlShebani, M.M. and Sinha, S.N. (2000), "Cyclic compressive loading-unloading curves of brick masonry", Struct. Eng. Mech., 9(4), 375-382. https://doi.org/10.12989/sem.2000.9.4.375
  6. Aoyama, H. and Noguchi, H. (1979), "Mechanical properties of concrete under load cycles idealizing seismic actions", Structural concrete under seismic actions, State of the art reports, CEB 131(1), Ed. Scientifiche associate, Roma.
  7. Campione, G. and La Mendola, L. (2001), "Stress-strain behavior in compression of lightweight fiber reinforced concrete under monotonic and cyclic loads", Proc. 3rd Conference on Earthquake Resistant Engineering Structures, Malaga.
  8. Hsu, L.S. and Hsu, C.T.T. (1994), "Stress-strain behavior of steel-fiber high strength concrete under compression", ACI Struct. J., 91(4), 448-457.
  9. Karsan, J.K. and Jirsa, J.O. (1969), "Behaviour of concrete under compressive loadings", J. Struct. Div., ASCE, 95(ST 12), 2543-2563.
  10. La Mendola, L. and Papia, M. (1997), "Safety condition of masonry columns subjected to horizontal forces: effects of material nonlinearity and cyclic loading", Structural Studies, Repairs and Maintenance of Historical Buildings, STREMAH V, Computational Mechanics Publications, Southampton (U. K.).
  11. Mander, J.B., Priestley, J.N. and Park, R. (1988a), "Observed stress-strain behavior of confined concrete", J. Struct. Engrg., ASCE, 114(8), 1827-1849. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1827)
  12. Mander, J.B., Priestley, J.N. and Park, R. (1988b), "Theoretical stress-strain model for confined concrete", J. Struct. Div., ASCE, 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  13. Naraine, K. and Sinha, S.N. (1989a), "Behavior of brick masonry under cyclic compressive loading", J. Construction Engrg. and Management, ASCE, 115(2), 1432-1445.
  14. Naraine, K. and Sinha, S.N. (1989b), "Loading and unloading stress-strain curves for brick masonry", J. Struct. Div., ASCE, 115(10), 2631-2643. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:10(2631)
  15. Naraine, K. and Sinha, S.N. (1991), "Cyclic behavior of brick masonry under biaxial compression", J. Struct. Engrg., ASCE, 117(5), 1336-1355. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:5(1336)
  16. Nataraja, M.C., Dhang, N. and Gupta, A.P. (1999), "Stress-strain curves for steel-fiber reinforced concrete under compression", Cement & Concrete Composites, 21(5-6), 383-390. https://doi.org/10.1016/S0958-9465(99)00021-9
  17. Powell, B. and Hodgkinson, H.R. (1976), "The determination of stress-strain relationship of brickwork", Proc. 4th International Brick Masonry Conference, Bruges.
  18. Sargin, M. (1971), "Stress-strain relationship for concrete and the analysis of structural concrete sections", Study 4, Solid Mechanics Division, University of Waterloo, Waterloo, Ontario.
  19. Sinha, B.P., Gerstle, K.H. and Tulin, L.G. (1964), "Stress-strain relations for concrete under cyclic loading", ACI J., 61(2), 195-211.
  20. Subramaniam, K.V. and Sinha, S.N. (1995), "Analytical model for cyclic compressive behaviour of brick masonry", ACI Struct. J., 92(3), 288-294.
  21. Sun, Y.P. and Sakino, K. (1993), "Axial behaviors of confined high strength concrete", Transactions of the Japan Concrete Institute, 455-462.
  22. Watanabe, F. (1997), "Research activities on high strength concrete and its application in Japan", Proc. First International Conference "High Strength Concrete", Kona, Hawaii.
  23. Zingone, G., La Mendola, L. and Campione, G. (1996), "The ductility of carbon fibre reinforced concrete joints in seismic areas", Proc. 11th World Conference on Earthquake Engineering, Acapulco.

피인용 문헌

  1. FRP-confined concrete under axial cyclic compression vol.28, pp.10, 2006, https://doi.org/10.1016/j.cemconcomp.2006.07.007
  2. Simplified Flexural Response of Steel Fiber-Reinforced Concrete Beams vol.20, pp.4, 2008, https://doi.org/10.1061/(ASCE)0899-1561(2008)20:4(283)
  3. Stress–strain model for FRP-confined concrete under cyclic axial compression vol.31, pp.2, 2009, https://doi.org/10.1016/j.engstruct.2008.08.014
  4. Deriving stress–strain relationships for steel fibre concrete in tension from tests of beams with ordinary reinforcement vol.42, 2012, https://doi.org/10.1016/j.engstruct.2012.04.032
  5. Analytical model for high-strength concrete columns with square cross-section vol.28, pp.3, 2008, https://doi.org/10.12989/sem.2008.28.3.295
  6. Influence of steel reinforcements on the behavior of compressed high strength R.C. circular columns vol.34, 2012, https://doi.org/10.1016/j.engstruct.2011.10.002
  7. Experimental and analytical response of masonry elements under eccentric vertical loads vol.27, pp.8, 2005, https://doi.org/10.1016/j.engstruct.2005.02.012
  8. Unloading and Reloading Stress–Strain Model for Confined Concrete vol.132, pp.1, 2006, https://doi.org/10.1061/(ASCE)0733-9445(2006)132:1(112)
  9. Fibrous reinforced concrete beams in flexure: Experimental investigation, analytical modelling and design considerations vol.30, pp.11, 2008, https://doi.org/10.1016/j.engstruct.2008.04.019
  10. Debonding Phenomena in CFRP Strengthened Calcarenite Masonry Walls and Vaults vol.12, pp.5, 2009, https://doi.org/10.1260/136943309789867872
  11. Stress-Strain Law for Confined Concrete with Hardening or Softening Behavior vol.2013, 2013, https://doi.org/10.1155/2013/804904
  12. Behavior of geopolymer concrete under cyclic loading vol.246, pp.None, 2020, https://doi.org/10.1016/j.conbuildmat.2020.118430
  13. Masonry subjected to semi-cyclic compression: Inelastic response modelling vol.263, pp.None, 2002, https://doi.org/10.1016/j.conbuildmat.2020.120147
  14. Axial strengthening of RC columns by direct fastening of steel plates vol.77, pp.6, 2002, https://doi.org/10.12989/sem.2021.77.6.705