Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

The dynamic stability of a nonhomogeneous orthotropic elastic truncated conical shell under a time dependent external pressure

  • Sofiyev, A.H. (Ondokuz Mayis University, Civil Engineering Department) ;
  • Aksogan, O. (Cukurova University, Civil Engineering Department)
  • Published : 2002.03.25
⟨ Previous Next ⟩

Abstract

In this research, the dynamic stability of an orthotropic elastic conical shell, with elasticity moduli and density varying in the thickness direction, subject to a uniform external pressure which is a power function of time, has been studied. After giving the fundamental relations, the dynamic stability and compatibility equations of a nonhomogeneous elastic orthotropic conical shell, subject to a uniform external pressure, have been derived. Applying Galerkin's method, these equations have been transformed to a pair of time dependent differential equations with variable coefficients. These differential equations are solved using the method given by Sachenkov and Baktieva (1978). Thus, general formulas have been obtained for the dynamic and static critical external pressures and the pertinent wave numbers, critical time, critical pressure impulse and dynamic factor. Finally, carrying out some computations, the effects of the nonhomogeneity, the loading speed, the variation of the semi-vertex angle and the power of time in the external pressure expression on the critical parameters have been studied.

Keywords

References

  1. Aksogan, O., and Sofiyev, A. (2000), "The dynamic stability of a laminated nonhomogeneous orthotropic elastic cylindrical shell under a time dependent external pressure", Int. Conf. on Modern Practice in Stress and Vibration Analysis, Nottingham, UK, 349-360.
  2. Baktieva, L.U., Jigalko, YU. P., Konoplev, YU. G., Mitryaikin, V.I., Sachenkov, A.V., and Filippov, E.B. (1988), "The stability and vibrations of shells under impulsive distribution and local loads", Research on the Theory of Plates and Shells, Kazan State University, Kazan, l, 113-130. (in Russian)
  3. Baruch, M., Harari, O., and Singer, J. (1970), "Low buckling loads of axially compressed conical shells", J. Appl. Mech., 37, 384-392. https://doi.org/10.1115/1.3408517
  4. Brinkman, J.A. (1954), "On the nature of radiation damage in metals", J. Applied Physics, 25, 961-970. https://doi.org/10.1063/1.1721810
  5. Delale, F., and Erdogan, F. (1983), "The crack problem for a nonhomogeneous plane", J. Appl. Mech., ASME, 50, 609-614. https://doi.org/10.1115/1.3167098
  6. Gutierrez, R.H., Laura, P.A.A., Bambill, D.V., Jederlinic, V.A., and Hodges, D.H. (1998), "Axisymmetric vibrations of solid circular and annular membranes with continuously varying density", J. Sound and Vibrations, 212(4), 611-622. https://doi.org/10.1006/jsvi.1997.1418
  7. Heyliger, P.R., and Julani, A. (1992), "The free vibrations of inhomogeneous elastic cylinders and spheres", Int. J. Solids and Struct., 29, 2689-2708. https://doi.org/10.1016/0020-7683(92)90112-7
  8. Irie, T., Yamada, G., and Kaneko,Y. (1984), "Natural frequencies of truncated conical shells", J. Sound and Vibrations, 92, 447-453. https://doi.org/10.1016/0022-460X(84)90391-2
  9. Lam, K.Y., and Hua, L. (1999), "Influence of boundary conditions on the frequency characteristics of a rotating truncated circular conical shell", J. Sound and Vibrations, 223, 171-195. https://doi.org/10.1006/jsvi.1998.1432
  10. Leissa, A.W. (1973), Vibration of Shells, NASA SP-288.
  11. Lekhnitski, S.G. (1980), Theory of Elasticity of an Anisotropic Elastic Body, Holden Day, San Francisco, Also Mir Publishers, Moscow.
  12. Lomakin, V.A. (1976), The Elasticity Theory of Nonhomogeneous Materials, Moscow, Nauka. (in Russian)
  13. Massalas, C., Dalamanagas, D., and Raptis, A. (1982), "Dynamic characteristics of conical shell with variable modulus of elasticity", Review Roumanie Sciences Techniques, Mechanics Applications, Bucharest, 27, 609-628.
  14. Massalas, C., Dalamanagas, D., and Tzivanidis, G. (1981), "Dynamic instability of truncated conical shells with variable modulus of elasticity under periodic compressive forces", J. Sound and Vibrations, 79, 519-528. https://doi.org/10.1016/0022-460X(81)90463-6
  15. Mecitoglu, Z. (1996), "Governing equations of a stiffened laminated inhomogeneous conical shell", American Institute of Aeronautics and Astronautics J., 34, 2118-2125. https://doi.org/10.2514/3.13360
  16. Mushtari, K.M., and Sachenkov, A.V. (1958), Stability of Cylindrical and Conical Shells of Circular Cross Section with Simultaneous Action of Axial Compression and External Normal Pressure, NASA TM-1433.
  17. Sachenkov, A.V. (1976), "The dynamic criterion of the stability of plates and shells", Research on the Theory of Plates and Shells, Kazan State University, Kazan, 12, 281-293. (in Russian)
  18. Sachenkov, A.V., and Aganesov, L.G (1964), "The stability and vibration of circular conical and cylindrical shells at different boundary conditions", Research on the Theory of Plates and Shells, Kazan State University, Kazan, 2, 111-126. (in Russian)
  19. Sachenkov, A.V., and Baktieva, L.U. (1978), Research on the theory of plates and shells, "Approach to the Solution of Dynamic Stability Problems of Thin Shells", Kazan State University, Kazan, 13, 137-152. (in Russian)
  20. Sachenkov, A.V., and Klementev, G.G. (1980), "Research of the stability of conical shells by theoreticalexperimental method under impulsive load", Research on the Theory of Plates and Shells, Kazan State University, Kazan, 15, 115-125. (in Russian)
  21. Singer, J. (1966), "Buckling of damped conical shells under external pressure", American Institute of Aeronautics and Astronautics J., 4, 328-337.
  22. Singer, J. (1961), "Buckling of circular conical shells under axisymmetrical external pressure", J. Mech. Eng. Sci., 3, 330-339. https://doi.org/10.1243/JMES_JOUR_1961_003_045_02
  23. Sivadas, K.R., and Ganesan, N. (1991), "Vibration analysis of laminated conical shells with variable thickness", J. Sound and Vibrations, 148, 477-491. https://doi.org/10.1016/0022-460X(91)90479-4
  24. Sofiyev, A., and Aksogan, O. (1999), "Dynamic stability of a nonhomogeneous orthotropic elastic cylindrical shell under a time dependent external pressure", Technical Journal, Chamber of Civil Engineers of Turkey, 10, 2011-2028.
  25. Tani, J. (1973), "Dynamic stability of truncated conical shells under periodic external pressure", The Report of the Institute of High Speed Mechanics, Tohoku University, Japan, 28, 135-147.
  26. Tani, J. (1981), "Dynamic stability of truncated conical shells under pulsating torsion", Transactions of the J. Appl. Mech., ASME, 48, 391-398. https://doi.org/10.1115/1.3157628
  27. Tong, L. (1993), "Free vibration of orthotropic conical shells", Int. J. Eng. Sci., 31, 719-733. https://doi.org/10.1016/0020-7225(93)90120-J
  28. Tong, L., Tabarrok, B., and Wang, T.K. (1992), "Simple solution for buckling of orthotropic conical shells", J. Solids and Struct., 29, 933-946. https://doi.org/10.1016/0020-7683(92)90067-4
  29. Volmir, A.S. (1967), The Stability of Deformable Systems, Nauka, Moscow. (in Russian)
  30. Yakushev, A.N. (1990), "The stability of orthotropic cylindrical shells under dynamic pressure", Research on the Theory of Plates and Shells, Kazan State University, Kazan, 20, 215-222. (in Russian)
  31. Zhang, X., and Hasebe, N. (1999), "Elasticity solution for a radially nonhomogeneous hollow circular cylinder", J. Appl. Mech., ASME, 66, 598-606. https://doi.org/10.1115/1.2791477

Cited by

  1. Buckling of a conical thin shell with variable thickness under a dynamic loading vol.270, pp.4-5, 2004, https://doi.org/10.1016/S0022-460X(03)00638-2
  2. The buckling of an orthotropic composite truncated conical shell with continuously varying thickness subject to a time dependent external pressure vol.34, pp.3, 2003, https://doi.org/10.1016/S1359-8368(02)00105-1
  3. The Dynamic Stability of Orthotropic Cylindrical Shells with Non-homogenous Material Properties under Axial Compressive Load Varying as a Parabolic Function of Time vol.25, pp.18, 2006, https://doi.org/10.1177/0731684406069914
  4. Nonlinear vibration and stability of a rotary truncated conical shell with intercoupling of high and low order modals vol.14, pp.1, 2009, https://doi.org/10.1016/j.cnsns.2007.06.007
  5. The stability of functionally graded truncated conical shells subjected to aperiodic impulsive loading vol.41, pp.13, 2004, https://doi.org/10.1016/j.ijsolstr.2004.02.003
  6. Torsional buckling of cross-ply laminated orthotropic composite cylindrical shells subject to dynamic loading vol.22, pp.6, 2003, https://doi.org/10.1016/S0997-7538(03)00090-1
  7. The buckling of a cross-ply laminated non-homogeneous orthotropic composite cylindrical thin shell under time dependent external pressure vol.14, pp.6, 2002, https://doi.org/10.12989/sem.2002.14.6.661
  8. The vibration and stability of non-homogeneous orthotropic conical shells with clamped edges subjected to uniform external pressures vol.34, pp.7, 2010, https://doi.org/10.1016/j.apm.2009.09.025
  9. The vibration and stability of orthotropic conical shells with non-homogeneous material properties under a hydrostatic pressure vol.319, pp.3-5, 2009, https://doi.org/10.1016/j.jsv.2008.06.033
  10. The effect of non-homogeneity on the stability of laminated orthotropic conical shells subjected to hydrostatic pressure vol.43, pp.1, 2002, https://doi.org/10.12989/sem.2012.43.1.089
  11. Time-dependent creep analysis and life assessment of 304 L austenitic stainless steel thick pressurized truncated conical shells vol.28, pp.3, 2002, https://doi.org/10.12989/scs.2018.28.3.349