초록
홀 확장법은 홀 주위에 압축 잔류응력 층을 생성시킴으로서 균열 발생을 지연시키는 방법으로 항공산업 분야에서 널리 사용되고 있다. 홀 확장잔류응력의 분포는 홀 확장률, 맨드럴 삽입방향, 재료 물성치 등 여러 가지 홀 확장 파라미터에 따라 달리진다. 홀 확장 잔류응력 층의 정확한 파악이 항공사업의 실제 설계에 있어서 매우 중요함에도 불구하고 이에 대한 연구는 상대적으로 부족하였다. 본 연구에서는 3차원 유한요소해석을 통하여 알루미늄 평판에 홀 확장법을 적용하는 경우의 잔류응력 분포를 예측하고자 하였다. 유한요소해석의 타당성을 검증하기 위하여 스트레인 게이지를 이용한 홀 확장 잔류변형률을 측정하였으며, 홀 확장률과 2단 홀 확장이 잔류응력 분포에 미치는 영향을 파악하였다. 2단 홀 확장을 적용함으로써 최대 압축 잔류응력의 크기가 약 7% 향상됨을 알 수 있었다.
Cold expansion of fastener holes is a mechanical process widely used in the aerospace industry. This treatment leads to an improvement of fatigue behavior due to the developed compressive residual stresses on the hole surface. The residual stress profile depends on the parameters of cold expansion, which are expanding rate, inserting direction of mandrel, material properties dtc. Despite its importance to aerospace industiries, little attention has been devoted to the accurate modeling of the process. In this paper, three-dimensional finite element simulations have been conducted for the cold expansion in an aluminium plate in order to predict the magnitude and distribution of the residual stress. To prove the results of FE analysis, the residual strain was measured by strain gage in cold expansion test. Maximum compressive residual stress could be increase about 7 percentage using the 2-step cold expansion method.