한국세라믹학회지 (Journal of the Korean Ceramic Society)

  • 제39권8호
  • /
  • Pages.783-788
  • /
  • 2002
  • /
  • 1229-7801(pISSN)
  • /
  • 2234-0491(eISSN)
한국세라믹학회 (The Korean Ceramic Society)
권호 표지
DOI QR코드

DOI QR Code

화학기상응축법을 이용한 Si-C-N Precursor 분말의 합성 및 특성평가

Synthesis and Characterization of Si-C-N Precursor by Using Chemical Vapor Condensation Method

  • 김형인 (강원대학교 신소재공학과) ;
  • 김대정 (강원대학교 신소재공학과) ;
  • 홍진석 (강원대학교 신소재공학과) ;
  • 소명기 (강원대학교 신소재공학과)
  • Kim, Hyoung-In (Department of the Advanced Materials Science and Engineering, Kangwon National University) ;
  • Kim, Dae-Jung (Department of the Advanced Materials Science and Engineering, Kangwon National University) ;
  • Hong, Jin-Seok (Department of the Advanced Materials Science and Engineering, Kangwon National University) ;
  • So, Myoung-Gi (Department of the Advanced Materials Science and Engineering, Kangwon National University)
  • 발행 : 2002.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서는 TMS[Tetramethylsilane:Si($CH_3)_4$], $NH_3$와 $H_2$를 이용하여 나노크기의 Si-C-N precursor 분말을 합성하기 위하여 CVC법을 이용하였으며 반응온도, TMS/$NH_3$ 비 그리고 TMS/$H_2$ 비를 변화시켰다. XRD와 FESEM 분석을 통해서 결정상과 입자의 크기 그리고 입자의 형태를 관찰하고자 하였으며, 그 결과 제조된 분말은 모든 실험 조건하에서 87∼130 nm 크기를 지닌 균일한 구형의 비정질 분말이 얻어졌다. 입자 크기는 반응온도의 감소에 따라 감소하였으며, 또한 TMS/$NH_3$, TMS/$H_2$ 비가 작아질수록 감소하였다. EA 분석 결과 제조된 분말은 Si, N, C, H로 이루어졌음을 알 수 있었으며 FT-IR를 통하여 Si-N, C-N, Si-C 결합을 가진 Si-C-N precursor 분말이 제조되었다

In this study, nano-sized Si-C-N precursor powders were synthesized by Chemical Vapor Condensation Method(CVC) using TMS(Tetramethylsilane: Si($CH_3)_4$), $NH_3$ and $H_2$ gases under the various reaction conditions of the reaction temperature, TMS/$NH_3$ ratio and TMS/$H_2$ ratio. XRD and FESEM were used to analysis the crystalline phase and the average particle size of the synthesized powders. It was found that the obtained powders under the considering conditions were all spherical amorphous powder with the particle size of 87∼130 nm. The particle size was decreased as the reaction temperature increased and TMS/$NH_3$ and TMS/$H_2$ ratio decreased. As the results of EA analysis, it was found that the synthesized powders had been formed the powders composed of Si, N, C and H. Through FT-IR results, it was found that the synthesized powders were Si-C-N precursor powders with Si-C, Si-N and C-N bonds.

키워드

참고문헌

  1. T. Yoshida, Y. Tamou, K. Eguchi and K. Akashi, 'The Prep-aration Ultrafine $Si_3N_4$ and SiC Powders in a Hybrid Plasma,' Proc. 8th-ICVM, Linz. Austria, 437-51 (1985)
  2. T. Tani, T. Yoshida and K. Akashi, 'The Synthesis of UltraSne $Si_3N_4$ in a Hybrid Plasma,' Yosyo-Kyokai-shi, 94 [1] 1-6 (1986)
  3. E. M. Lenoe and J. L. Meglen, 'International Perspective on Ceramic Heat Engines,' Ceram. Bull., 64 [2] 271-75 (1985)
  4. K. Niihara and A. NaKahira, 'Particle-strengthened Oxide Ceramics Nanocomposite,' pp. 637-64 in Advanced Struc-tural Inorganic Composites. Edited by P. Vincentini. EIse-viser Science Publshers, Trieste, Italy (1990)
  5. K. Niihara and A. Nakahira, 'Strengthening and Tough-ening Mechanisms in Nanocomposite,' Ann. Chim(Paris.), 16 479-82 (1991)
  6. A. Nakahira, T. Sekino, Y. Suzuki and K. Niihara, 'High-temperature Creep and Deformation Behaviour of $Al_2O_3$/SiC Nanocomposites,' Ann. Chim(Paris.), 19 403-08 (1993)
  7. K. Niihara, 'New Design Concept of Structural Ceramics-Ceramic Nanocomposite,' J. Ceram. Soc. Jpn., 99 [10] 974-82 (1991) https://doi.org/10.2109/jcersj.99.974
  8. T. Ohji, A. Nakahira, T. Hirano and K. Niihara, 'Tensile Creep Behavior of Alumina/Silicon Carbide Nanocompos-ite,' J. Am. Ceram. Soc., 77 [12] 3259-62 (1994) https://doi.org/10.1111/j.1151-2916.1994.tb04580.x
  9. X. Pan, J. Mayer, M. $R\ddot{u}hle$ and K. Niihara, 'Silicon Nitride Based Ceramic Nanocomposite,' J. Am. Ceram. Soc., 79 [3] 590-95 (1996)
  10. J. Sakamoto, H. Kodama and T. Miyoshi, 'In-situ Obser-vation of Fracture Behavior of SiC Fiber-$Si_3N_4$ Matrix Com-posite,' J. Ceram. Soc. Jpn., 95 [9] 869-74 (1987)