References
- M. J. Readey and C. L. McCallen, 'Microstructure, Flaw Tolerance and Reliability of Ce-TZP and Y-TZP Ceramics,' J. Am. Ceram. Soc., 78, 2769-2776 (1995) https://doi.org/10.1111/j.1151-2916.1995.tb08053.x
- J. Li, A. Kawasaki and R. Watanabe, 'R-curve Determination of 3Y-PSZ by the Indentation Strength-in-bending Method,' J. Ceram. Soc. Jpn., 105, 88-90 (1997) https://doi.org/10.2109/jcersj.105.88
- R. M. Anderson and L. M. Braun, 'Technique for the Rcurve Determination of Y-TZP Using Indentation-produced Flaws,' J. Am. Ceram. Soc., 73, 3059-3062 (1990) https://doi.org/10.1111/j.1151-2916.1990.tb06716.x
- S. Lawson, 'Environmental Degradation of Zirconia Ceramics,' J. Eur. Ceram. Soc., 15, 485-502 (1995) https://doi.org/10.1016/0955-2219(95)00035-S
-
M. Hirano and H. Inada, 'Fabrication and Properties of (Y,Ce)-TZP/Al
$_{2}$ O$_{3}$ and Y-TZP/Al$_{2}$ O$_{3}$ Composites from Fine Powder Prepared by a Hydrolysis Technique,' J. Ceram. Soc. Jpn., 99, 124-130 (1991) https://doi.org/10.2109/jcersj.99.124 - D-J. Kim, 'Influence of Aging Environment on Low-temperature Degradation of Tetragonal Zirconia Alloys,' J. Eur. Ceram. Soc., 17, 897-903 (1997) https://doi.org/10.1016/S0955-2219(96)00205-1
-
D. Y. Lee, D-J. Kim and D-H. Cho, 'Low-temperature Phase Stability and Mechanical Properties of Y
$_{2}$ O$_{3}$ and Nb$_{2}$ O$_{5}$ Co-doped Tetragonal Zirconia Polycrystal Ceramics,' J. Mater. Sci. Lett., 17, 185-187 (1998). https://doi.org/10.1023/A:1006567808134 -
D. Y. Lee, J-w. Jang and D-J. Kim, 'Raman Spectral Characterization of Existing Phases in the
$ZrO_2-Y_2O_3-Nb_2O_5$ System,' Ceram. Inti., 27, 291-298 (2001) https://doi.org/10.1016/S0272-8842(00)00079-1 - P. Li, I-W. Chen and J. E. Penner-Hahn, 'Effect of Dopants on Zirconia Stabilization-an X-ray Absorption Study: III, Charge-compensating Dopants,' J. Am. Ceram. Soc., 74, 1289-1295 (1994)
-
D. Y. Lee, D-J. Kim, D-H. Cho and M-H. Lee, 'Effect of Nb
$_{2}$ O$_{3}$ and Y$_{2}$ O$_{3}$ Alloying on the Mechanical Properties of TZP Ceramics,' Ceram. Inti., 24, 461-465 (1998) https://doi.org/10.1016/S0272-8842(97)00036-9 -
D. Y. Lee and D-J. Kim, 'Strength and Fracture Toughness of Isostatically Hot-pressed (Y,Nb)-TZP/Al
$_{2}$ O$_{3}$ Composites,' J. Mater. Sci. Lett., 19, 1233-1235 (2000) https://doi.org/10.1023/A:1006709110273 - G. A. Gogotsi, V. I. Galenko, B. A. Ozerskii, E. E. Lomonova, V. A. Myzina, M. A. Vishnyakova and V. F. Kalabukhova, 'Strength and Crack Resistance of Zirconium Dioxide Crystals Containing Yttrium and Terbium Oxides,' Refractories, 34, 247-358 (1993)
- G. A. Gogotsi, E. E. Lamonova, Y. A. Furmanov and I. M. Savitskaya, 'Zirconia Crystals Suitable for Medicine: 1. Implants,' Ceram. Intl., 20, 343-348 (1994) https://doi.org/10.1016/0272-8842(94)90052-3
- G. A. Gogotsi and D. Yu. Ostrovoy, 'Mechanical Behaviour of Partially Stabilized Zirconia Crystals with Terbia and Ceria Additives,' J. Eur. Ceram. Soc., 15, 1177-1184 (1995) https://doi.org/10.1016/0955-2219(95)00100-X
- R. C. Garvie and P. S. Nicholson, 'Phase Analysis in Zirconia Systems,' J. Am. Ceram. Soc., 67, 303-305 (1972)
- M. J. Mendelson, 'Average Grain Size in Polycrystalline Ceramics,' J. Am. Ceram. Soc., 52(8), 443-446 (1969) https://doi.org/10.1111/j.1151-2916.1969.tb11975.x
-
D-J. Kim, M-H. Lee, D. Y. Lee and J-S. Han, 'Mechanical Properties, Phase Stability and Biocompatibility of (Y,Nb)TZP/Al
$_{2}$ O$_{3}$ Composite Abutments for Dental Implant,' J. Biomed. Mater. Res., 53, 438-443 (2000) https://doi.org/10.1002/1097-4636(2000)53:4<438::AID-JBM19>3.0.CO;2-3 - D. Y. Lee, D-J. Kim, J-w. Jang, D-W. Choi and S-J. Lee, 'Phase Stability of (Y,Nb)-TZP/Composites under Low Temperature Hydrothennal Conditions,' Mater. Lett., 39, 221-226 (1999) https://doi.org/10.1016/S0167-577X(99)00010-5
- J-w. Jang, D-J. Kim and D. Y. Lee, 'Size Effect of Trivalent Oxides on Low Temperature Phase Stability of 2Y-TZP,' J. Mater. Sci., 36(22), 5391-5395 (2001) https://doi.org/10.1023/A:1012409009280