초록
유해 중금속을 함유하고 있는 제철 폐기물 슬러지를 안전하게 처리하기 위하여 고로 수쇄 슬래그와 포틀랜드 시멘트를 이용한 중금속 고화용 슬래그 시멘트, 고황산염 시멘트를 제조하여 폐슬러지의 고화를 시도하였다. 고로 수쇄 슬래그와 보통포틀랜드 시멘트를 6:4로 혼합하고 여기에 자극제로서 CaO를 10% 가한 슬래그 시멘트 재료를 사용한 경우, STS 슬러지는 C-S-H 그리고 ettringite와 monosulfate 등의 수화물이 생성되면서 강도가 지속적으로 증가함을 보여주고 있지만 성상과 성분이 다른 BF 슬러지와 COREX 슬러지에 적용하였을 때는 강도 발현이 좋지 않았다. 하지만 고화처리용 슬래그 시멘트를 이용하여 STS에 BF 및 COREX 슬러지를 각각 5:5로 혼합한 혼합슬러지에 적용한 경우 고화체의 강도는 슬래그 시멘트를 이용한 경우 폐기물 고화 처리 기준을 상회하는 충분한 강도를 보였다. 한편, 수쇄슬래그, 반수석고, 보통 포틀랜드 시멘트에 자극제를 혼합한 폐기물 처리용 고황산염계 시멘트를 이용하여 고화가 힘들었던 COREX 슬러지에 적용한 결과, 3일 강도가 이미 고화처리기준을 상회하는 좋은 결과를 얻어, 이 시멘트 재료로서 COREX 슬러지의 고정/안정화도 가능함을 보여주고 있다.
Slag cement and supersulfated slag cement were fabricated by mixing blast furnace slag and ordinary portland cement and adapted to solidify/stabilize heavy metal contained hazardous waste sludge. In case of slag cement, it showed continuous increase of their compressive strengths, which is attributed to the formation of the C-S-H, ettringite and monosulfate with STS sludge. However, BF and COREX sludge has a different shape and composition. therefore, adequate compressive strength could not be achieved with this slag cement. In case of the mixture of the each sludge like the STS-BF or the STS-COREX, the compressive strength over the standard level for disposing the wastes could be obtained with slag cement. The supersulfated slag cement that contain accelerators was very effective in solidifying the COREX sludge, which was difficult to solidify using different cement and obtained high compressive strength only for 3 days.