Abstract
The cartesian loop chip which is one of key devices in narrow-band Walky-Talky transmitter using RZ-SSB modulation method was designed and implemented with 0.35 ㎛ CMOS technology. The reduced size and low cost of transmitter were available by the use of direct-conversion and cartesian loop chip, which improved the power efficiency and linearity of transmitter. In addition, low power operation was possible through CMOS technology. The performance test results of transmitter showed -23㏈c improvement of IMD and -30㏈c below suppression of SSB characteristic in the operation of cartesian loop chip (closed-loop). At that time, the transmitting power was about 37㏈m (5W). The main parameters to improve the transmitting characteristic and to compensate the distortion in feed back loop such as DC-offset, loop gain and phase value are interfaced with notebook PC to be controlled with S/W.
RZ-SSB(Real Zero-Single Sideband) 변조 기술을 이용하는 협대역 무전기용 송신기에 가장 핵심적인 부품들 중의 하나인 카테지안 루프 칩을 0.35$\mu\textrm{m}$ CMOS 기술을 이용하여 설계하고 제작하였다. 직접변환 방식 및 카테지안 루프 칩을 이용하여 요구되는 부품 수를 줄임에 의하여 송신부의 저비용 및 소형화가 가능하고, 이를 통하여 송신 전력 효율 및 선형성을 향상시켰다. 또한 CMOS 기술을 통하여 저전력 구동이 가능하도록 하였다. 송신기 성능 시험 결과 개루프 시 약 37㏈m (5W) 의 송신 출력에서 카테지안 루프 칩을 구동하여 즉, 폐루프 상태에서 -23㏈c의 상호변조 왜곡 특성 개선 및 SSB 신호 특성을 -30㏈c 이하로 억압하였다. 또한, 상기 언급된 송신 특성 개선에 가장 영향을 미치는 성분들인 DC-offset 성분, 궤환 루프에서 발생하는 왜곡 성분을 보상하기 위한 루프 이득 및 위상 값들을 조정할 수 있도록 컴퓨터와의 외부 인터페이스를 구현하여 S/W적으로 이러한 값들을 제어할 수 있도록 프로그램화 하였다.