DOI QR코드

DOI QR Code

A Workspace Analysis Method of Multi-Legged Walking Robot in the Velocity Domain

다족 보행로봇의 속도작업공간 해석

  • Published : 2002.06.01

Abstract

This paper deals with a workspace analysis of multi-legged walking robots in velocity domain(velocity workspace analysis). Noting that when robots are holding the same object in multiple cooperating robotic arm system the kinematic structure of the system is basically the same with that of a multi-legged walking robot standing on the ground, we invented a way ot applying the technique for multiple arm system to multi-legged walking robot. An important definition of reaction velocity is made and the bounds of velocities achievable by the moving body with multi-legs is derived from the given bounds on the capabilities of actuators of each legs through Jacobian matrix for given robot configuration. After some assumption of hard-foot-condition is adopted as a contact model between feet of robot and the ground, visualization process for the velocity workspace is proposed. Also, a series of application examples will be presented including continuous walking gaits as well as several different stationary posture of legged walking robots, which validate the usefulness of the proposed technique.

Keywords

References

  1. Bill Goodwine and Joel Burdick, 'Gait controllability for legged robots,' Proc. of the Conf. on Robotics & Automation, pp. 484-489, 1998 https://doi.org/10.1109/ROBOT.1998.677021
  2. Vincent Hugel and Pierre Blazevic, 'Towards efficient implementation of qudruped gaits with duty factor of 0.75,' Proc. of the Conf. on Robotics & Automation, pp. 2360-2365, 1999 https://doi.org/10.1109/ROBOT.1999.770458
  3. Dong-Oh Kang and Ynn-jung Lee et al., 'A Study on an adaptive gait for a quadruped walding robot under external forces,' Proc. of the Conf. on Robotics & Automation, pp. 2777-2782, 1997 https://doi.org/10.1109/ROBOT.1997.606707
  4. W. Ilg, J. Albiez, H. Jedele, K. Berns, and R. Dillmann, 'Adaptive periodic movement control for the four legged walking machine BISAM,' Proc. of the Conf. on Robotics & Automation, pp. 2354-2359, 1999 https://doi.org/10.1109/ROBOT.1999.770457
  5. B. bayle, J.Y. Fourquet, and M. Renaud, 'Manipulability analysis for mobile manipulators,' Proc. of the Conf. on Robotics & Automation, pp. 1251-1256, 2001 https://doi.org/10.1109/ROBOT.2001.932782
  6. T. Yoshikawa, 'Manipulability of robotic mechanisms,' J. Robot, vol. 4, no. 2, pp. 3-9, 1985 https://doi.org/10.1177/027836498500400201
  7. Antonio Bicchi, Claudio Melchiorri, and Daniele Balluchi, 'On the mobility and manipulability of general multiple limb robots,' IEEE Trans. on Robotics and Automation, vol. 11, no. 2, pp. 215-228, 1995 https://doi.org/10.1109/70.370503
  8. J. Lee, 'Velocity workspace analysis for multiple arm robot systems,' Robitica, vol. 19, pp. 581-591, 2001 https://doi.org/10.1017/S0263574700003179
  9. J. Lee, 'A stuctured algorithm for the minimum ∞-norm solution and its application to robot velocity workspace analysis,' Robotica, vol. 19, pp. 343-352, 2001 https://doi.org/10.1017/S0263574700003003
  10. Jasbir S.Arora, 'Introduction to optimum design,' McGraw-Hill, 1989
  11. Shigeo Hirose and Keisuke Kato, 'Study on quadruped walking robot in Tokyo Institute of Technology-Past, Present and Future-,' Proc. of the Conf. on Robotics & Automation, pp. 414-419, 2000 https://doi.org/10.1109/ROBOT.2000.844091
  12. J. Lee, 'A study on the mnipulability measures for robot manipulators,' Proc. IEEE/RSJ Conf. Intelligent Robots and Systems, pp. 1458-1464, Sept. 1997 https://doi.org/10.1109/IROS.1997.656551