대한전자공학회논문지TE (Journal of the Institute of Electronics Engineers of Korea TE)

대한전자공학회 (The Institute of Electronics and Information Engineers)
권호 표지

IMT-2000 중계기용 전대역 저잡음 증폭기 설계

The Design of Low Noise Amplifier for Overall IMT-2000 Band Repeater

  • 유영길 (대림대학 전자정보통신계열)
  • 발행 : 2002.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

IMT-2000 전 대역(1920∼2170MHz, BW=250MHz)에서 사용되는 중계기용 2단 저잡음 증폭기를 설계하였다. Ansoft사의 Serenade를 이용하여 첫째 단 PHEMT의 소스와 접지간 source lead의 인덕턴스 값을 최적화하여 기판 선고로 등가화하고, 첫째 단의 잡음 정합은 물론 각 단의 정합회로가 간단하도록 high pass 구조로 설계하였다. 바이어스 회로는 단일 능동회로로 구성하였고, 인가전압은 8V, 총 전류는 180mA이다. 이때, 첫째 단 PHEMT의 Vgs = -0.4V, Vds = 4V이고, 둘째 단 AH1의 Vds = 5V이다. 상업화가 가능하도록 설계 기준을 정하여 제작되었고, 측정 결과 이득은 20dB, NF는 1dB, 입력 VSWR은 1.14∼l.3dB, P1dB는 22.4dBm, gain flatness는 ±0.45dB로 상업용 저잡음 증폭기로 사용될 수 있다.

The LNA(Low Noise Amplifier) is designed for use in low cost commercial application covered fully IMT-2000 band(1920~2170MHz, BW=250MHz). It is optimized source inductance for source lead and designed to equivalent etched line. The LNA uses a high pass impedance matching network for noise match and simple structure. The bias circuit designs have been made self-biased with a negative voltage applied to gate. The power supply voltage is 8V, total current is 180mA. The LNA is biased at a Vgs of -0.4, Vds of 4V for first stage and Vds of 5V for second stage. The LNA is designed competitively for commercial product specification. The measured gain and noise figure of the completed amplifier was 20dB and 1dB, respectively. Also, input VSWR, P1dB and gain flatness was measured of 1.14 ~ l.3dB, 22.4dBm and $\pm$0.45dB, respectively. The designed LNA can be used for commercial product.

키워드

참고문헌

  1. Matthew M. Radmanesh, 'Radio Frequence and Microwave Electronics', Prentice Hall, pp. 122-158, 2001
  2. Peter B. Kenington, 'High-Linearity RF Amplifier Design', Artech House, pp. 89-131, 2000
  3. Tatsuo Itoh, George Haddad, and James Harvey, 'RF Technologies for Low Power Wireless Communications', Willy-Interscience, pp. 159-188, 2001
  4. Kai Chang, Inder Bahl, and Vijay Nair, 'RF and Microwave Circuit and Component Design for Wireless Systems', Willy-Interscience, pp. 271-309, 2002
  5. Kevin McClaning and Tom Vito, 'Radio Receiver Design', Noble Publishing Corporation, pp. 443-538, 2000
  6. Agilent Technologies, 'Low Noise Amplifiers for 900 MHz using the Agilent ATF-34143 Low Noise PHEMT', Agilent Technologies Application Note 1190, 2000
  7. Agilent Technologies, 'High Intercept Low Noise Amplifier for 1930-990 MHz PCS Band using the Agilent ATF-34143 Low Noise PHEMT(4V, 40mA)', Agilent Technologies Application Note 1191, 2000
  8. Agilent Technologies, 'A Low Noise High Intercept Point Amplifier for 1930-990 MHz PCS Band using the Agilent ATF-33143 PHEMT', Agilent Technologies Application Note 1195, 2000
  9. Agilent Technologies, 'High Intercept Low Noise Amplifiers for 1500 MHz through 2500 MHz using the ATF-34143 Low Noise PHEMT', Agilent Technologies Application Note 1175, 1999
  10. Guillermo Gonzalez, 'Microwave Transistor Amplifiers', Prentice Hall, pp. 212-373, 1997