Fire Science and Engineering (한국화재소방학회논문지)

Korean Institute of Fire Science and Engineering (한국화재소방학회)
권호 표지

A Study on the Characterstics of the BaT$iO_3$PTC Thermistor for Fire Detection Sensor

화재감지센서 활용을 위한 BaT$iO_3$계 PTC 서미스터의 특성에 관한 연구

  • 추순남 (경원전문대학 전기제어시스템과) ;
  • 최명규 (경원전문대학 전기제어시스템과) ;
  • 백동현 (경원전문대학 소방안전관리과) ;
  • 박정철 (경원전문대학 전자정보과)
  • Published : 2002.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

This dissertation is about the development of $BaTiO_3$-type PTC(Positive Temperature Coefficient) thermistor by composition method. A multilayer-type PTC samples were fabricated under optimal conditions after setting the experimental composition equation as ($Ba_{0.95-x}$S $r_{0.05}$$Ca_{x}$ )$TiO_3$-$0.01TiO_2$-$0.01SiO_2$-$\alpha$$MnCO_3$-$\beta$N $b_2$ $O_{5}$.) and their testing results were analyzed. The optimal sin-tering and cooling temperatures were 13$50^{\circ}C$ for two hours and $100^{\circ}C$/h for an hour, respectively; By composing Ca and Mn, dopants to lower the resistivity at room temperature, and Nb, a dopant to raise peak resistivity(Ca:5 mol%, Mn:0.08 mol%, Nb:0.18 mol%), appropriately, a PTC thermistor, having the characteristics of relatively low resistivity at room temperature and high peak resistivity and a good temperature coefficient, has been developed. And we find that it is possible of application for fire detection sensor.r.r.

BaTiO$_3$계 PTC 서미스터의 조성개발을 위해 (Ba$_{0.95-x}$S $r_{0.05}$C $a_{x}$)$TiO_3$-$0.01TiO_2$-$0.01SiO_2$-$\alpha$MnCO_3$-$\beta$Nb_2$o_{5}$와 같은 실험조성식을 설정한 후 최적 조건하에서 적층형 PTC시편을 제작하여 실험하였다. 실험 결과, 시편제조시의 최적 소결온도와 냉각속도는 각각 $1350^{\circ}C$-2 hour및 $100^{\circ}C$/h였다. 또한 상온저항을 낮추는 효과가 있는 Dopant로서의 Ca와 Mn 그리고 피크(peak)저항값을 높일 수 있는 Nb를 Ca:5 mol%, Mn:0.08 mol%, Nb:0.18 mol%로 함으로써 비교적 낮은 상온저항과 높은 피크(peak)저항 및 양호한 온도계수 특성이 나타났으며, 화재감지센서로서의 활용 가능성을 확인하였다.다.다.

Keywords

References

  1. P. W. Haayman, R. W. Dam and H. A. Klassens, 'Semiconductive Materials', German Pat. No.929, pp. 350, June 23(1955)
  2. Y. Matsuo and M. Fujimura, 'Semiconducting BaTiO_3 with Additions of Al_2O_3, SiO_2, and TiO_2, Ceramic Bulletin, No. 3, pp. 292, June 5(1968)
  3. B. H. Kim and J. W. Moon, 'Development of PTCR Compositions for Automobile', J. Kor. Ass. Cry. Growth, No. 1, pp. 151(1998)
  4. W. Heywang, 'Solid state Electron', 3, 51,(1961)
  5. B. C. H. Steele, 'Electronic Ceramics', Elsevier Applied Science', pp.29(1991)
  6. H. J. Kwon and J. S. Lee, 'The Electrical Characteristics of the Grain Boundary in a $BaTiO_3$ PTC Thermistor', 센서 학회지, No. 1, pp. 67 (1992)
  7. K. Dodtert, 'Application of Self-heated PTC thermistor to flow and Quantity of Heat Measurements', Sensor and Actuators, Vol. 3, pp. 159(1982) https://doi.org/10.1016/0250-6874(82)80017-6
  8. J. H. Lee and S. H. Cho, 'The role of grain boundary modifier in $BaTiO_3$ system for PTCR Devic', Kor. J. Mat. Res., No.5, pp.553(1993)
  9. Al-Allak, H. M., Russell, G. J. and Woods, J., 'Effect of Annealing on the Characteristics of Semiconducting $BaTiO_3$ Positive Temperature Coefficient of Resistance Devices', J. Phys. D., No. 12, pp.1645(1987)
  10. 이용현 외 4명, 'PTC서미스터 소자의 개발(II)', 센서기술 연구소(1993)
  11. 백동현, 김용혁, 최일수, 화재감지센서용 PZN-PSS-PZT계 초전재료의 전기적 특성에 미치는 $MnO_2$첨가제의 영향, 한국소방학회지 Vol. 9, No. 2, pp.29-36,(1995)