Transactions of the Korean Society of Mechanical Engineers B (대한기계학회논문집B)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Characteristics of Swirl Flow in a Diesel Engine by 2-Zone Energy Method and Image Process of Flame

2영역 에너지법과 화염 화상 처리법을 이용한 디젤 연소실내 스월 유동 특성에 관한 연구

  • Published : 2002.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, many researches have been performed to improve the performance of the combustion and emission in a D.I.Diesel engine. And many new techniques have been introduced and developed to reduce NO$_{x}$ and soot exhausted from diesel combustion. Some of these methods have the peculiar injection timing which is not used to traditional timing. To optimize these injection timing, characteristics of swirl flow and interaction of swirl with injection in the diesel engine should be investigated more carefully. Therefore, in this study, 2-zone energy method is adopted for the understanding of swirl flow in condition of moving piston, and then flame visualizations and image process are performed. From these studies, the characteristics of the swirl flow generated by SCV was investigated and the effect of swirl on injection timing was elucidated. As the results, velocity distribution caused by swirl flow increase the space utilization rate of flame plums. And flame plums of weak momentum are remained inside of combustion chamber by the swirl flow.w.

Keywords

References

  1. Johannes Bierbaumer, Rainer Cichock, Walter Ospelt, 1998, '$CO_2$ Emssion Reduction - the Contribution of Modern HSDI Engines,' Fifth Engine Workshop on $CO_2$ Reduction Technologies in Reciprocationg Engines, KSAE
  2. Roy M. Cuenca, 'Evolution of Diesel Fuel Injection Equipment - The last 20 years' SAE paper No. 933015
  3. Greg R Pucher, DavidP Gardiner, Michael F Bardon, Vittoria Battista, 'Alternative Combustion Systems for Piston Engines Involving Homogeneous Charge Compression Ignition Concepts - A Review of Studies Using Methanol, Gasoline and Diesel Fuel,' SAE paper, No. 962063
  4. 松井幸雄, 木村修二, 小池正生, 1997, '小形DIディ- ゼル機關の新燃燒コンセプト,' 日本自動車技術會論文集, Vol. 28, No. 1, pp. 41-46
  5. 城戶 裕之, 和栗 雄太郞, 中島 健四郞, 1984, 'シリンダ內ガス流動の豫測方法に關する硏究,' 自動車技術會論文集, No. 29, pp. 18-29
  6. Akira Murakami, Masataka Arai, Hiroyaki Hiriyasu, 'Swirl Measurements and Modeling in Direct Injection Diesel Engines,' SAE paper No. 880385
  7. William J. Smith, 'Estimation of Air Motion Kinetic Energy Dissipation Rates in a D.I.Diesel combustion system,' SAE paper No. 960876
  8. Nicos Ladommatos, Razmil Aivaz Balian, and Richard Stone 'Analysis of Swirl in Unsteady Flow and Its Effects on Diesel Combustion,' SAE paper No. 921643
  9. Arold, M.L., Espey, C., Litzinger, T.A., Santavicca, D.A. and Santoro, R.J., 'A Study of Non-Swirling and Swirling and Their Effcets on Spray Flow Fields and Combustion in an Optically-Accessible, DI. Diesel Engine,' SAE paper No. 900396
  10. Espey, C., Pinston, J.A., and Litzinger, T.A., 'Swirl Effects on Mixing and Flame Evolution in a Research DI Diesel Engine,' SAE Paper No. 902076
  11. Im Yong H., Huh Kang Y., 2000, 'Phenomenological Modeling of a Direct Injection Diesel Engine with In-Cylinder Flow Effects,' KSME International Journal, Vol. 14, No. 5, pp. 569-581 https://doi.org/10.1007/BF03185660