Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

A Study on Intelligent Generator of Optimal Process Conditions to Avoid Short Shot

미성형 방지를 위한 최적조건 생성 시스템 연구

  • 강성남 (한국기술교육대 대학원 기계공학과) ;
  • 허용정 (한국기술교육대 메카트로닉스공학부) ;
  • 조현찬 (한국기술교육대 정보기술공학부)
  • Published : 2002.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

A short shot is a molded part that is incomplete because insufficient material was injected into the mold. Remedial actions to control the process conditions can be taken by the injection molding experts based on their knowledge and experience. However, it is very difficult for the non-experts to avoid short shot by finding the proper process conditions such as mold temperature, melt temperature and filling time. In this paper, an intelligent generator of the optimal process conditions based upon fuzzy logic algorithm is proposed so that trial and error can be minimized and the non-experts as well as the experts can also find the optimal process conditions.

Keywords

References

  1. T. C. Jan, K. T. O' Brien, 'Architecture of an Expert System for Injection Molding Problems,' Annual Technical Conference in Society of Plastic Engineers '91, pp. 431-443, 1991
  2. L. T. Nguyen, A. Danker, N. Santhiran and C. R. Shervin, 'Flow Modeling of Wire Sweep during Molding of Integrated Circuits,' ASME Winter Annual Meeting, Nov. 8-13, 1992
  3. L. S. Turng, C-Mold Design Guide, AC Technololgy, 1994
  4. D. V. Rosato, D. V. Rosato, Injection Molding Handbook, Van Nostrand Reinhold Company inc., 1986
  5. Sang-Gook Kim, Nam P. Suh, 'Knowledge Based Synthesis for Injection Molding,' Robotics & Computer Integrated Manufacturing, Vol. 3, No. 2, pp. 181-186, 1987 https://doi.org/10.1016/0736-5845(87)90100-1
  6. C-Mold, Version No. 981.1098, AC Technology, 1997
  7. L. A. Zadeh, 'Fuzzy Sets,' Inf. Control, Vol. 8, pp. 338-353, 1965 https://doi.org/10.1016/S0019-9958(65)90241-X
  8. L. A. Zadeh, 'Fuzzy logic,' IEEE. Computer Mag., pp. 83-93, Apr. 1988
  9. Sang-Kook Kim, Yong-Jeong Huh,'Expert Design Evaluation System for Injection Molding,' International Journal of the Korean Society of Precision Engineering, Vol. 2, No. 1, pp. 62-75, 2001