Abstract
This paper proposes a high-speed FFT processor for orthogonal frequency-division multiplexing(OFDM) systems. The Proposed architecture uses a single-memory architecture and uses a radix-4 algorithm for high speed. The proposed memory is partitioned into four banks for high-speed computation. It uses an in-place memory strategy that stores butterfly outputs in the same memory location used by butterfly inputs. Therefore, the memory size can be reduced. The SQNR of about 80dB is achieved with 20-bit input and 20-bit twiddle factors. The architecture has been modeled by VHDL and logic synthesis has been performed using the SamsungTM 0.5㎛ SOG cell library (KG80). The implemented FFT processor consists of 98,326 gates excluding memory. It has smaller hardware than existing pipeline FFT processors for more than 1024-point FFTs. The processor can operate at 42MHz and calculate a 256-point complex FFT in 6us. It satisfies tile required processing speed of 8.4㎲ in the HomePlug standard.
본 논문에서는 고속 데이터 전송을 위한 OFDM(Orthogonal Frequency Division Multiplex) 시스템용 고속 FFT 프로세서를 제안한다 제안된 구조는 단일 메모리 구조를 채택하였으며 고속 연산을 위해 Radix-4 알고리즘과 메모리 뱅크 구조를 사용하였다. 또한, 버터플라이 출력이 입력 데이터의 위치에 저장되는 In-place 메모리 구조를 사용하여 메모리의 크기를 줄였다. 설계한 프로세서는 내부 데이터와 회전인자는 각 각 20 비트로 설계되었으며, 약 80dB의 SQNR 성능을 갖는다. 그리고 VHDL로 모델링한 후 삼성 0.5㎛ SOG 공정으로 합성하여 메모리를 제외한 전체 게이트 수가 98,325개를 보였으며 제안된 구조는 1,024-포인트부터는 기존의 파이프라인 구조보다 하드웨어 측면에서 이득을 가진다. 동작속도는 42MHz로 256-포인트 연산이 6㎲에 처리 가능한 구조로 HomePlug 표준안의 8.4㎲의 처리속도를 만족시킨다.