Journal of Ship and Ocean Technology

대한조선학회 (The Society of Naval Architects of Korea)
권호 표지

Hydrodynamic Performance of a 2,500-ton Class Trimaran

  • Kang, kuk-Jin (Korea Research Institute of Ships and Ocean Engineering, KORDI) ;
  • Lee, Chun-Ju (Korea Research Institute of Ships and Ocean Engineering, KORDI) ;
  • Kim, Sun-Young (Korea Research Institute of Ships and Ocean Engineering, KORDI) ;
  • Park, Yun-Rak (Korea Research Institute of Ships and Ocean Engineering, KORDI) ;
  • Lee, Jin-Tae (Korea Research Institute of Ships and Ocean Engineering, KORDI)
  • 발행 : 2002.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper describes the powering, seakeeping and maneuvering performances for a 2,500-ton class trimaran. Influence of the side-hull forms and location of those in longitudinal and transverse direction to resistance performance was systematically investigated by a series of model tests and numerical calculations. It was found that the longitudinal location of side-hulls was the most influential design parameter to the resistance performance of the trimaran and the optimum location of side-hull depends on ship speeds. When the side-hull stem is located near the primary wave hollow generated by the main hull, the trimaran shows the best resistance performance. Powering performance of the trimaran is superior to those of similar mono-hull ships. Seakeeping model tests for the trimaran were executed and the results were compared with the theoretical results of a similar mono-hull ship. Generally speaking, seakeeping performance of the trimaran is superior to that of a mono-hull ship. In particular, pitching and rolling performance of the trimaran is excellent, which is due to the increased length and breadth. Maneuvering model tests using a HPMM equipment were executed to evaluate the maneuvering performance of the trimaran. Maneuvering simulation was performed using the maneuvering coefficients from the model tests. The results show that the control ability of heading angle and the direction keeping stability of the trimaran is excellent, even though the turning performance is rather worse compared to those of a similar mono-hull ship.

키워드

참고문헌

  1. BENJAMIN B. ACKERS ET AL 1997 An Investigation on the Resistance Characteristics of Powered Trimaran Side-Hull Configurations. SNAME Transactions 105, pp. 349-373
  2. http://www.qinetiq.com/trimaranlhtmllrvtriton.asp
  3. KANG, K.J. ET AL 2000 Development of the Core Technologies of Hydrodynamic Performance for Large High Speed Special Ship (4/4). KRISO report UCE00918-2296
  4. KIM, D.H. ET AL 1999 Estimation of the Optimum Position for the Side Hulls of a Trimaran by Panel Method. 4th J-K Joint Workshop on Ship & Marine Hydrodynamics, Fukuoka, Japan
  5. KIM, S. Y. ET AL 1988 Development of Maneuverability Prediction Technique (in Korean). KIMM Report No. UCE.337-1082.D
  6. OCHI, M.K. AND MOTTOR, L.E. 1974 Prediction of Extreme Ship Responses in Rough Seas on the North Atlantic. Sym. on the Dynamics of Marine Vehicles and Structures in Waves, London
  7. PROCEEDINGS OF ITTC 1981 Report of the Seakeeping Committee
  8. RINA 2000 RV 'TRITON': Trimaran Demonstrator Project. International conference proceeding
  9. YANG, S.l. ET AL 1979 Development of a Computer Program for Ship Motion Analysis (in Korean). KRIS Report UCE37-55.79