References
- H. Bessemer, US Patent 49053, July 25, 1856
- 강태욱 외, 'Strip Casting 공정개발 IV,' Vol.1, pp.1-14, 1996
- J. M. Damasse, D. Themines and L. Vendeville, 'The Myosotis Project Progress report,' La Revue de Metallurgie, Vol.97, No.1, pp.43-52, 2000
- K. Tanaka, K. Yamamoto, H. Takata, T. Yamane, T. Matsumoto, R. Hashimoto and Y. Wakiyama, US Patent 5560421, 1996
- B. Lindorfer, H. Bumberger, C. Furst, G. L. Houze, B. D. Love and T. M. Browne, 'Perspectives of strip casting technology based on results from the coil cast prototype of allegheny Ludlum', METEC Congress 94, pp.451-456, 1994
- 강충길, 김영도, '용탕직접압연공정의 초기 조건 예측 및 냉각로울 설계,' 한국 소성 가공학회지, 제4권, 제3호, pp.233-244, 1995
- C.G. Kang & Y.D. Kim, 'Optimum shape design techniques of direct roller under thermal load and rolling force in the direct rolling process of molten materials considering solid fraction', Journal of Materials Processing Technology, Vol.67, pp.71-77,1997 https://doi.org/10.1016/S0924-0136(96)02821-X
- C.G. Kang, Y.D. Kim and Y.J.Chung, 'A thermal process analysis considering sheet thickness variation of width direction in twin roll strip continuous casting,' THERMEC'97, pp.2193-2199 1997
- C.G. Kang, Y.D Kim and S.W.Lee, 'A Solidification and cooling roll deformation analysis considering thermal flow in twin roll strip continuous casting process,' The Minerals, Metal & Materials Society, pp. 65-86, 1996
- R. Kopp, U. Albrecht-Fruh, L. Hentschel, U. Rudolphi, J. W. Schmitz, D. Senk & F. Simon, 'Technological challenges of the twin roll strip casting process,' THERMEC'97, pp.2201-2207, 1997
- MARC manual, MSC. Software Korea, 2001
- 김완수, 정형태, 이용기, 정성인, 강태욱, '쌍롤식 박판주조공정의 응고시 열전달계수값 모델에 관한 연구', RIST 硏究論文, 제13권, 제4호, pp.396-402,1999
- N. ZAPUSKALOV & M. VERESCHAGIN, 'Effect of technological factors on strip profile in twin roll casting process', ISIJ international, Vol. 38, No.10, pp.1107-1113,1998
- Davy Distington Limited Internal Report Spec. No. 104416, 1992
- G. Hohenbichler, U. Albrecht-Fruh, J. M. Damasse and R. Capotosti, 'Future Perspectives of the strip casting process for flat steel prodution', Proceedings of the CCC'2000 in Linz, Innovation Session, Paper No. 6, 2000
- R. Kopp, F. Hagemann, L. Hentschel, J. W. Schmitz and D. Senk, 'Thin-strip casting-modeling of the combined casting/metal-forming process', J. Mat. Proc. & Tech., pp.80-81, pp.458-462,1998