References
- Ohata, T., Nakamura, Y, Katayama, T., Nakamachi, E. and Nakano, K., 1996, 'Development of Optimum Process Design System by Numerical Simulation,' J. Mater. Process. Technol., Vol. 60, pp. 543 - 548 https://doi.org/10.1016/0924-0136(96)02384-9
- Hillmann, M. and Kubli, W., 1999, 'Optimization of Sheet Metal Forming Processes using Simulation Programs,' proc. NUMISHEET'99, pp. 287 - 292
- Ghouati, O., Lenoir, Rand Gelin, J. C, 1999, 'Optimization Techniques for the Drawing of Sheet Metal Parts,' proc. NUMISHEET'99, pp. 293 - 298
- Yang. J, B., Jeon, B. Rand Oh, S. I., 2001, 'Design Sensitivity Analysis and Optimization of the Hydroforming Process,' J. Mater. Process. Technol., Vol. 113, pp. 666-672 https://doi.org/10.1016/S0924-0136(01)00670-7
- Se-Ho Kim and Hoon Huh, 'Optimum Design of the Process Parameter in Sheet Metal Forming with Design Sensitivity Analysis using the Direct Differentiation Approach: I. Design Sensitivity Analysis,' Transactions of the KSME, A, Vol. 26, No. 10, pp. 2245 - 2252
- Belytschko, T., Lin, J. I. and Tsay, C., 1984, 'Explicit Algorithms for the Nonlinear Dynamics of Shells,' Comput. Methods Appl. Mech. Engrg., Vol. 42, pp. 225 - 251 https://doi.org/10.1016/0045-7825(84)90026-4
- Flanagan, D. and Belytschko, T., 1981, 'A Uniform Strain Hexahedron and Quadrilateral with Orthogonal Hourglass Control,' Int. J. Numer. Meth. Engng., Vol. 17, pp. 679-706 https://doi.org/10.1002/nme.1620170504
- Hill, R., 1950, The Mathematical Theory of Plasticity, Oxford, Claredon Press
- Simo, J. C. and Taylor, R. L., 1986, 'A Return Mapping Algorithm for Plane Stress Elasto-plasticity,' Int. J. Numer. Meth. Engng., Vol. 22, pp. 649-670 https://doi.org/10.1002/nme.1620220310
- VMA Engineering, DOT Users Manual, Ver. 4.0, 1993
- Traversin, M and Kergen, R., 1995, 'Closed-loop Control of the Blank-holder Force in Deep Drawing: Finite-element Modeling of its Effects and Advantages,' J. Mater. Process. Technol., Vol. 50, pp. 305-317 https://doi.org/10.1016/0924-0136(94)01389-I
- Cao, J. and Boyce, M. C, 1997, 'A Predictive Tool for Delaying Wrinkling and Tearing Failures in Sheet Metal Forming,' Trans. ASME, J. Eng. Mater. Technol., Vol. 119, pp. 354-365 https://doi.org/10.1115/1.2812270
- Cao, J., Kinsey, B. and Solla, S. A., 2000, 'Consistent and Minimal Springback using a Stepped Binder Force Trajectory and Neural Network Control,' Trans. ASME, J. Eng. Mater. Technol., Vol. 122, pp. 113-118 https://doi.org/10.1115/1.482774
- Han, S. S. and Park, K. C., 1999, 'An Investigation of the Factors Influencing Springback by Empirical and Simulative Techniques,' proc. NUMISHEET'99, Vol. 1, pp. 53 - 57
- Makinouchi, A., Nakamachi, E., Onate, E. and Wagoner, R. R, 1993, Proceedings of the 2nd International Conference NUMISHEET'93, Ishihara