References
- Flemings, M. C., 1991, 'Behavior of Matal Alloys in the Semi-Solid State,' Metallurgical Transaction A, Vol. 22, pp. 957 - 981 https://doi.org/10.1007/BF02661090
- Pitts, H. E., and Atkinson, H. V., 1998, 'Thixforming of 6061 Al Alloy for Automotive Components,' The 5th Int. Conf. on Semi-Solid Processing of Alloys and Composites, pp. 97 - 104
- Mullins, A. M. and Walker, D. J., 1996, 'Modelling Solid/Fluid Interactions in A Dendritic Semi Solid,' The 4th Int. Conf. on Semi-Solid Processing of Alloys and Composites, pp. 104-109
- Barkhudarov, M. R., Bronisz, C. L. and Hirt, C. W., 1996, 'Three-Dimensional Thixotropic Flow Model,' The 4th Int. Conf. on Semi-Solid Processing of Alloys and Composites, pp. 110-114
- Paradies, C. J., Rappaz, M., Imwinkelried, T. and Gabathuler, J. P., 1996, 'Simulation of the Pressure Die Casting of A Thixotropic Aluminum Alloy,' The 4th Int. Conf. on Semi-Solid Processing of Alloys and Composites, pp. 115-119
- Burgos, G. R. and Alexandrou, A. N., 1998, 'Two-Phase Model of Flow of Semi-Solid Materials,' The 5th Int. Conf. on Semi-Solid Processing of Alloy and Composites, pp. 217-224
- Modigell, M. and Koke, J., 1998, 'Two-Phase Model for Metal Alloys in the Semi-Solid State,' The 5th Int. Conf. on Semi-Solid Processing of Alloy and Composites, pp. 317-326
- Kang, C. G. and Kim, Y. D., 1997, 'A Finite Element Analysis on the Upsetting Process of Semi-Solid Aluminum Material,' J. of Materials Processing Technology, Vol. 66/1-3, pp. 76-84 https://doi.org/10.1016/S0924-0136(96)02498-3
- Koc, M., Vazquez, V., Witulski, T. and Altan, T., 1996, 'Application of the Finite Element Method to Predict Material Flow and Defects in the Semi-Solid Forging of A356 Aluminum Alloys,' J of Materials Processing Technology, Vol. 59, pp. 106-112 https://doi.org/10.1016/0924-0136(96)02291-1
- Kang, C. G., Choi, J. S. and Kang, D. W., 1998, 'A Filling Analysis of the Forging Process of Semi-Solid Aluminum Materials Considering Solidification Phenomena,' J. of Materials Processing Technology, Vol. 30, No. 438, pp. 289-302 https://doi.org/10.1016/S0924-0136(97)00240-9
- Kang, C. G. and Yoon, J. H., 1996, 'A Compression Behavior of Semi-Solid Material and Finite Element Analysis Considering Flow of Liquid Phase,' Transaction of The Korean Society of Mechanical Engineers A, Vol. 20, No. 12, pp. 3715-3727
- Jung, H. K., Kang, C. G. and Moon, Y. H., 2000, 'Induction Heating of Semi-Solid Billet and Control of Globular Microstructure to Prevent Coarsening Phenomena,' J. of Materials Processing Technology, Vol. 9, No.1, pp. 12 -23 https://doi.org/10.1361/105994900770346222
- Kang, C. G. and Kang, D. W., 1997, 'The Effect of Forging Process of Semi-Solid Aluminum Material on Mechanical Properties,' Transaction of The Korean Society of Mechanical Engineers A, Vol. 21, No.9, pp. 1400-1413
- Kurz, W. and Fisher, D. J., 1984, Fundamentals of Solidification, Trans Tech Publication
- Kim, N. S. and Kang, C. G., 2000, 'An Investigation of Flow Characteristics Considering Effect of Viscosity Variation in Thixoforming Process,' J. of Materials Processing Technology, Vol. 103, pp. 237-246 https://doi.org/10.1016/S0924-0136(99)00441-0
- Harlow, F. H. and Welch, E. J., 1965, 'Numerical Calculation of Time-Dependent Viscous Incompressible Flow of Fluid with Free Surface,' The Physics of Fluid, Vol. 8, No. 12, pp. 2182-2189 https://doi.org/10.1063/1.1761178
- Ohnaka, I., 1985, 'Introduction of Compute Heat and Solidification Analysis,' MARUZEN, pp. 167-208
- 1990, Metal Handbook, ASM International, 10th Edition, Vol. 2, pp. 2 - 164
- Jung, H. K. and Kang, C. G., 1999, 'An Induction Heating Process with Coil Design and Solutions Avoiding Coarsening Phenomena of AI-6 Pct Si-3 Pct Cu-0.3 Pct Mg Alloy for Thixoforming,' Metallurgical and Materials Transactions A, Vol. 30, No. 11, pp. 2967-2977 https://doi.org/10.1007/s11661-999-0134-5
- Garat, M., Blais, S., Pluchon, C. and Loue, W. R., 1998, 'Aluminum Semi-Solid Processing : from the Billet to the Finished Part,' The 5th Int. Conf. on Semi-Solid Processing of Alloys and Composites, pp. xvii-xxxi
- Kang, C. G., Kang, B. S. and Kim, K. H., 1999, 'The Effect of Strain Rate on Macroscopic Behavior in Compression Forming of Semi-Solid Aluminum Alloy,' J. of Materials Processing Technology, Vol. 88, pp. 159-168 https://doi.org/10.1016/S0924-0136(98)00383-5
- Kang, C. G., 1998, 'Effect of Gate Shape and Forging Temperature on the Mechanical Properties in the Injection Forging Process Semi-Solid Aluminum Material,' J. of Materials Processing Technology, Vol. 73/1-3, pp. 251-263 https://doi.org/10.1016/S0924-0136(97)00234-3
- J. of Materials Processing Technology v.73/1-3 Effect of Gate Shape and Forging Temperature on the Mechanical Properties in the Injection Forging Process Semi-Solid Aluminum Material Kang, C. G.